NOTE

•The camera can load up to 8 files.

When an attempt is made to load a new file while 8 files have already been loaded, “READ NG CAC FILE FULL” appears. To load a new file, delete an existing file before loading the new file.

For details, see [Deleting CAC File] (this page).

•“READ NG FORMAT ERROR” indicates the file cannot be used and will not be loaded. Make sure the file is in a format the camera supports and that the file on the SD card is not corrupted.

Deleting CAC File

1

Open the LENS SETUP screen.

 

 

For details on menu operation, refer to [Using the

 

 

menus] (page 129).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Use the JOG dial button to select CAC FILE

 

 

DELETE, select EXECUTE and press the JOG

 

 

dial.

 

 

 

 

 

 

 

 

 

LENS SETUP

 

 

 

SHADING SELECT

 

DEFAULT

 

 

 

SHADING(USER)

>>>

 

 

 

 

 

CAC

 

ON

 

 

 

CAC PROPERTY

>>>

 

 

 

 

 

CAC CARD READ

>>>

 

 

 

 

 

CAC FILE DELETE

 

RETURN

 

 

 

 

CAC FILE INIT

 

EXECUTE

 

 

 

 

 

IRIS ADJUST

 

 

 

 

 

 

 

 

>>>

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PUSH MENU TO RETURN

 

 

 

 

 

 

 

 

 

 

3

Use the JOG dial to select the CAC file to be

deleted. Then select YES and press the JOG dial button.

“-----” is indicated when deletion ends.

CAC FILE DELETE

1:XT17X4.5BRM-K14 2:

3:

4:

5:

6:

7:

8:

PUSH MENU TO RETURN

CAC FILE DELETE

CAC FILE NO:1

DELETE?

 

 

 

 

YES

PUSH SET

 

NO

 

Initializing CAC File (Returning Data to Their Factory Defaults)

 

 

 

 

 

 

 

 

 

 

1

Open the LENS SETUP screen.

 

 

For details on menu operation, refer to [Using the

 

 

menus] (page 129).

 

 

 

 

5  

 

 

 

 

 

 

 

 

 

2

Use the JOG dial button to select CAC FILE

 

 

 

 

INIT, select EXECUTE and press the JOG dial.

Chapter

 

 

 

LENS SETUP

 

 

 

 

 

 

SHADING SELECT

DEFAULT

 

 

 

SHADING(USER)

>>>

 

 

 

 

 

CAC

ON

Preparation

 

 

CAC PROPERTY

>>>

 

 

 

 

CAC CARD READ

>>>

 

 

 

 

 

CAC FILE DELETE

>>>

 

 

 

 

 

CAC FILE INIT

 

RETURN

 

 

 

 

IRIS ADJUST

 

EXECUTE

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PUSH MENU TO RETURN

 

 

 

 

 

 

 

 

 

 

 

3

Select YES in the confirmation screen and

 

 

press the JOG dial button.

 

• CAC FILE INIT PROCESSING COMPLETED (these three appear in succession) to indicate that initialization has been completed.

• The LENS SET UP screen appears after completion.

CAC FILE INIT

CAC FILE INITIAL?

YES PUSH SET

NO

NOTE

This operation deletes all files loaded into the camera and returns the four CAC data files to their factory defaults.

103