Connecting the AJ-RC10G Remote Control Unit

•Some functions can be remote controlled when the remote control unit AJ-RC10G (optional accessory) is connected to the camera.

•When the AJ-RC10G is connected, the camera automatically enters remote control mode after the power switches of both the camera and the AJ-RC10G are turned ON.

NOTE

•Be sure to turn the POWER switches on the camera and the AJ-RC10G off before connecting or disconnecting the controller cable.

•Use only designated cables or designed option cables to connect the AJ-RC10G. Use of other cables could result in equipment damage.

•The USER buttons and MENU button do not work when the AJ-RC10G is connected.

•Refer to the Operating Instructions of the AJ-RC10G included in the supplied CD-ROM.

•For details on the current provided by the REMOTE terminal, refer to page 174.

Preparation Chapter 5  

REMOTE connector

AJ-RC10G

Connecting the AG-EC4G Extension Control Unit

•Some functions can be remote controlled when the AG-EC4G extension control unit (optional accessory) is connected to the camera.

•When the AG-EC4G is connected, the camera automatically enters remote control mode after the power switches of both the camera and the AG-EC4G are turned ON.

NOTE

•Be sure to turn the POWER switches on the camera and the AG-EC4G off before connecting or disconnecting the controller cable.

•Use only designated cables or designated option cables to connect the AG-EC4G. Use of other cables could result in equipment damage.

•The USER buttons and MENU button do not work when the AG-EC4G is connected.

•For details on the current provided by the REMOTE terminal, refer to page 174.

REMOTE connector

AG-EC4G

109