Audio (input) Function Section

7

2

8

 

6

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

4

3

5

 

Parts andapterCFunctionseirh 2

1MIC IN (microphone input) jack (XLR, 3-pin)

•Connect a microphone (optional accessory) to this jack.

•A phantom-powered microphone may be connected.

To use a phantom-powered microphone, set the menu option F.MIC POWER to ON in the AUDIO SETUP screen.

For details, refer to [Preparing for Audio Input] (page 104).

2AUDIO LEVEL CH1/CH2 (audio channel 1/2 recording level adjustment) controls

•With the AUDIO SELECT CH1/CH2 switch positioned to MAN, these controls can be used to adjust the recording levels for audio channels 1 and 2.

•Note that the controls are designed to be locked. For adjustment, each control must be depressed while turning.

3AUDIO SELECT CH1/CH2 (audio channel 1/2 automatic/manual level adjustment selector) switch Use this switch to select recording level control mode for Audio Channels 1 and 2.

AUTO: Recording level automatically controlled.

MAN: Recording level manually controlled. For details, refer to [Adjusting Recording Levels] (page 62).

4AUDIO IN (audio input selector) switch

Use this switch to select signals recorded through audio channels 1 – 4.

FRONT: Records signals from a microphone connected to the MIC IN jack.

W.L.(WIRELESS):

Records signals from a wireless receiver. REAR: Records signals from audio devices or

microphones connected to the AUDIO IN CH1/CH2 connectors.

NOTE

To record 2-channel wireless input, switch both CH1 and CH2 to W.L. position and set the menu option WIRELESS TYPE in the AUDIO SETUP screen to DUAL.

5AUDIO IN CH1/CH2 (audio channel 1/2) connectors (XLR, 3-pin)

Audio devices or microphones may be connected here. For details, refer to [When Using Audio Devices] (page 105).

6LINE/MIC/+48V (line input/mic input/mic input +48V) selector switch

Use to select audio signals input to the AUDIO IN CH1/ CH2 connectors.

LINE: Line input for audio signals input from an audio device

MIC: Audio signal input from microphone with internal power supply (the camera does not supply power to a phantom microphone).

+ 48V: Audio signal input from a microphone

that requires an external power supply (the camera supplies power to a phantom microphone).

NOTE

Power is supplied when the menu option R.MICPOWER in the AUDIO SETUP screen is set to ON.

7FRONT AUDIO LEVEL (audio recording level adjustment) control

•This control adjusts the recording level of audio channels 1 and 2.

•With the AUDIO SELECT CH1/CH2 switch positioned to MAN, this control can be used to adjust the recording levels for audio channels 1 and 2.

•Use the menu options FRONT VR CH1 and FRONT VR CH2 in the AUDIO SETUP screen to select the input connector this control will be used for.

8Wireless slot

A Unislot wireless receiver (optional accessory) may be attached here.

19