Interval recording (INTERVAL REC)

This function is used to record 1 frame at the time interval set in the INTERVAL TIME item.

 

 

1 frame

 

1 frame

1 frame

 

 

recording

recording

recording

 

 

 

 

 

 

 

 

 

 

 

 

 

(time)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Set INTERVAL

 

 

Set INTERVAL

 

 

 

TIME setting

 

 

 

TIME setting

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Check that the SYSTEM SETUP screen is set

 

 

up as described on page 42.

 

 

 

 

 

For details on menu operation, refer to [Using the menus] (page 129).

 

 

 

2

Select INTERVAL in the menu option REC

 

 

FUNCTION in the RECORDING SETUP

 

 

screen.

 

 

 

3

Set the time in the menu option INTERVAL

 

 

TIME in the RECORDING SETUP screen.

 

 

 

4

Press the REC button.

• The camera will repeat 1-frame recording for the time interval set in the INTERVAL TIME option.

• Press the STOP button to stop recording.

• To cancel this function, turn the camera off or select NORMAL in the REC FUNCTION option.

• The following indications appear to the left of the operation status display.

• During recording: “I-REC” stays lit.

• During a pause: “I-PAUSE” stays lit.

When a setting of less than 2 seconds is made in step 3, “I-REC” blinks according to time setting during recording.

• When stopped: “I-” in “I-PAUSE” blinks.

NOTE

• The pre-recording and one-clip recording functions are not available.

• Sound is not recorded.

• Data recorded (until the STOP button is pressed) in this mode is recorded as a single file.

• There is no output from the DVCPRO/DV connector.

One-shot recording(ONE SHOT REC)

This function records a single shot at each unit of time which has been set.

1

Check that the SYSTEM SETUP screen is set

 

up as described on page 42.

 

For details on menu operation, refer to [Using the

 

menus] (page 129).

 

 

2

Select ONE SHOT in the menu option REC

 

FUNCTION in the RECORDING SETUP

 

screen.

 

 

3

Set the time in the menu option ONE SHOT

 

TIME in the RECORDING SETUP screen.

 

 

4

Press the REC button.

 

• The camera will pause recording after making a

 

recording that lasts the duration set in step 3.

• Press the STOP button to stop recording.

• To cancel this function, turn the camera off or select NORMAL in the REC FUNCTION option.

• The following indications appear to the left of the operation status display.

• During recording: “I-REC” stays lit.

• During a pause: “I-PAUSE” stays lit.

• When stopped: ”I-“ in “I-PAUSE” blinks.

NOTE

•No other functions are available during operation.

•The pre-recording and one-clip recording functions are not available.

•Sound is not recorded.

•Data recorded (until the STOP button is pressed) in this mode is recorded as a single file.

•There is no output from the DVCPRO/DV connector.

•During continuous one-shot recording, recording operation speed may be decreased.

Recording ChapterPlaybackand 3

43