3 Press the THUMBNAIL MENU button and select OPERATION COPY from the thumbnail menu.

•Select slot 1-2 or SD memory card as the destination.

Setting of Clip Meta Data

Information such as the name of the person who shot the video, the name of the reporter, the shooting location, or a text memo can be read from the SD memory card, and can be recorded as Clip Meta Data.

•When a confirmation screen asks you to confirm that you want to copy the clip, use a cursor button and the SET button to select YES if you want to copy the clip.

NOTE

•Do not turn off the power or remove a P2 card while data is being copied. Otherwise the P2 card may fail or defective clips may be generated. Delete any defective clips that are generated and copy them again.

•When clips are copied to P2 cards, all the information on the clips is copied. However, when they are copied to the SD memory card *1, video and sound information is not copied, only thumbnails, clip metadata, icons, voice memo, text memo, proxy, and real-time metadata.

•When there is insufficient recording capacity on the destination, the message “LACK OF REC CAPACITY!” is displayed, and copying will not proceed. When clips selected for copying contain defective clips, the message “CANNOT COPY” appears and copying will not proceed. If the selected clips include clips already on the destination P2 card, copying will not proceed.

•To interrupt copying, press the SHIFT and EXIT buttons or the SET button. The clip that was being copied is deleted at the destination.

•When identical clips exist on the destination card, the “OVERWRITE?” is displayed. Select “YES” or “NO”.

*1 Regarding SD memory cards to be used, see [SD memory card precautions] (page 24).

Reading the SD memory card that

 

contains the Clip Meta Data (metadata

 

upload file)

6  

 

 

 

 

 

 

 

 

 

 

1

 

Insert the SD memory card that contains the

ChapterClips

 

 

 

 

Clip Meta Data (metadata upload file).

 

 

 

 

 

 

2

 

Press the THUMBNAIL button.

Manipulating

 

• The thumbnail screen appears on the LCD

 

 

 

 

monitor.

 

 

 

 

 

 

 

NOTE

 

 

Press the THUMBNAIL button while pressing DISP/

 

 

MODE CHK button when a thumbnail is displayed to

 

 

move to step 4.

 

 

 

 

 

Thumbnails

3

 

Press the THUMBNAIL MENU button and

 

 

Select META DATA LOAD from the thumbnail menu, and press the SET button.

4 Names of metadata upload files stored on the SD memory card are displayed *1. Select the desired files using the cursor buttons, and choose YES.

•Uploading starts.

•Uploaded metadata is retained even if the power is turned off.

•For more information on confirmation of uploaded data, see [Checking and modifying read metadata] (page 120).

*1 Press the cursor button (O) to display the full name of the file, up to 100 characters, at the cursor position. Press the cursor button (P) to return to the previous location.

119