Manipulating ChapterClips 6  

DIR ENTRY NG CARD:

The directory structure on the P2 card is not supported.

For details on P2 card status indications, refer to [2. P2 Card Status (used memory capacity)]

SD memory card Status Display

The status display enables a confirmation of the SD memory card formatted condition, available memory capacity etc. From the thumbnail menu, select PROPERTY

DEVICES SD CARD.

If the format is compatible with SD standards, the message

SD STANDARD : SUPPORTED

If the format is not compatible with SD standards, the message

SD STANDARD : NOT SUPPORTED

is displayed. If this is the case, writing or reading will not be successful. Format the card with the unit. For more information on formatting SD memory cards, see [Formatting SD memory cards] (page 124).

Thumbnails

NOTE

The indication of remaining capacity on an SD memory card (PROXY REM) provides only a rough estimate of remaining capacity and may differ from actual remaining capacity. SD and SDHC memory cards with Speed Class Ratings may indicate recording times that are significantly lower than actual capacity, especially when used for recording a large number of short video clips. The remaining capacity is displayed only when proxy recording is set up to record on an SD memory card. For details on setup procedures, refer to the User’s Guide of the video encoder card (AJ-YAX800G, an optional accessory).

Video Encoder Card Status Display (optional)

Attaching the video encoder card (AJ-YAX800G, optional), select PROPERTY DEVICES PROXY from the thumbnail menu.

The slot in which the video encoder card is inserted, and version information is displayed.

128