Overview Chapter 1
Slow, synchro and high speed shutter
The shutter speed can be set from a slow speed of 1/6 s up to a maximum speed of 1/7200 s *1. Combined with the variable frame rate functions, this allows you to create blurring or stop motion effects. The
Scene file dial
This dial allows you to instantly retrieve settings that suit shooting conditions. Six preset files are provided, and you can change the file names and their settings as desired. You can also save up to four files to an SD or SDHC memory card (both referred to as “SD memory card” below) and load files from an SD memory card.
Shooting assist functions
USER buttons:
Three USER buttons each of which can be assigned a frequently used function for immediate access. Focus assist:
Magnifies the center portion of the image and displays a focus bar to facilitate focusing.
Eight files for compensating lens chromatic aberration and four files for correcting shading for interchangeable lenses are provided.
Variable color temperature:
Allows fine adjustment after setting the white balance. REC REVIEW:
Provides a quick check of the last few seconds of the most recently recorded clip.
Chromatic aberration compensation (CAC)
This function automatically corrects the registration error caused by the slight chromatic aberration that the lens cannot compensate for, in order to minimize color bleeding into surrounding image areas.
Remote control support
This camera supports the
Auto Tracking White Balance (ATW)
Automatically adjusts the white balance of the subject in
DRS (Dynamic Range Stretcher) function
This function compresses the video signal level while maintaining contrast to extend the dynamic range making it possible to correctly render highlight areas without overexposure and loss of detail that would otherwise occur. *2
Camera extension system support
This camera can be connected to the
*1 This is the shutter speed value when 3.0d is configured for the synchro scan mode. *2 The DRS function is not available in 1080/30P, 1080/24P (1080/25P) modes.
12