Maintenance ChapterInspectionsand 9
| Warning | LCD or viewfinder |
| Warning | Alarm | Warning description |
|
Priority | Tally lamp | and recording/playback | Countermeasures | ||||
| type | indication |
| lamp | tone*6 | operation |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
| Check the camera |
|
|
|
|
|
| The DVCPRO/DV cable | and device |
| 1394 |
| Blinks 4 | Blinks 4 |
| connections, | |
| 1394 INITIAL ERROR Blinks |
| has become disconnected | ||||
8 | connection | times per | times per | No | reconnect them if | ||
| error | red | second | second |
| or multiple devices are | necessary, then turn |
|
|
| connected. | ||||
|
|
|
|
|
| the power off and | |
|
|
|
|
|
|
| |
|
|
|
|
|
|
| back on again. |
|
| The last bar in the battery |
|
|
|
|
|
| Battery | level indication blinks (This | Blinks 1 time | Blinks 1 time |
| The battery is near depletion. | Replace the battery |
9 | nearly empty | indication appears also | per second | per second | No | Operation continues.*5 | as necessary. |
|
| when MENU indications |
|
|
|
|
|
|
| have been turned OFF.) |
|
|
|
|
|
|
|
| Blinks 1 time | Blinks 1 time |
| Less than 2 minutes is left on |
|
| P2 card |
|
| the P2 cards (level indicator |
| ||
| The P2CARD level indicator | per second | per second |
| Replace or insert | ||
10 | nearly fully | No | shows 1 minute or less). This | ||||
| recorded | blinks. | during | during |
| warning appears only during | additional P2 cards. |
|
|
| recording. | recording. |
| recording. |
|
|
|
|
|
|
|
|
*1 P2 SYSTEM ERROR cause indication
•P2 MICON ERROR: The P2 microprocessor does not respond.
•P2 CONTROL ERROR: A P2 recording control error has occurred.
•CAM MICON ERROR: The camera microprocessor does not respond. *2 REC WARNING cause indication
•CARD ERROR*: P2CARD error (* indicates the number of the slot of the card with the error.) Stops recording.
•REC RAM OVERFLOW: Overflow of recording RAM. Stops recording.
•PULL DOWN ERROR: 24P, 30P (25P) video pulldown error. Recording continues.
•OVER MAX# CLIPS: The limit for the number of clips that can be recorded to one P2 card (up to 1000 clips) has been reached.
•ERROR: Other recording errors.
*3 Perform either of the following procedures to cancel this warning.
•Press a playback control button.
•Press the THUMBNAIL button.
•Remove the P2 card and insert another card.
*4 Perform either of the following procedures to cancel this warning.
•Press the REC button.
•Press a playback control button.
•Press the THUMBNAIL button.
•Remove all cards.
*5 When NEAR END CANCEL is set to ON, you can press the DISP/MODE CHK button to cancel the alarm.
*6 When the alarm sounds, audio is not output to the camera speakers or earphones. The DISP/MODE CHK button cancels only the alarm tone when pressed during an alarm.
162