Parts andapterCFunctionseirh 2

Audio (output) Function Section

3 4 1

2

5

6

7

1MONITOR SELECT (audio channel) CH1/2, CH3/4 selector switch

Use this switch to select the audio channel whose signals are output to the speaker, earphones or AUDIO OUT connectors.

CH1/2: Signal output of audio channels 1 and 2.

CH3/4: Signal output of audio channels 3 and 4. The channel indications of the audio level meters in the viewfinder and on the LCD monitor show the channels selected with this switch.

2MONITOR SELECT (audio selection) CH1/3, ST, CH2/4 selector switch

This switch and the MONITOR SELECT CH1/2, CH3/4 switch select the audio signal output to the speaker, earphones and AUDIO OUT connectors.

MONITOR SELECT

MONITOR SELECT switch (right)

switch (left)

CH1/2

CH3/4

 

CH1/3

Audio Channel 1

Audio Channel 3

MONITOR

 

Stereo signals

Stereo signals

ST

from Audio

from Audio

SELECT

 

Channels 1 and 2*1

Channels 3 and 4*1

 

 

 

CH2/4

Audio Channel 2

Audio Channel 4

*1  MIX in the menu option MONITOR SELECT in the AUDIO SETUP screen allows you to change stereo signals to a mixed signal.

3MONITOR (volume) control

Use to control the alarm sound volume and volume of sound output from the monitor speaker and earphones.

4Speaker

The speaker outputs EE sound during recording and reproduced sound during playback. The speaker emits an alarm sound when the warning lamp and indicator light or blink. EE sound and reproduced sound are not output during alarm sound output.

When earphones are connected to the PHONES connector, the sound from the speaker is automatically muted.

5PHONES (earphones) jack (mini jack)

This connector is designed for audio monitoring (stereo) earphones.

6DC OUT (DC power supply) output socket. This is a 12 V DC output socket that provides a maximum current of 1.5 A.

NOTE

Be sure to check polarity before connecting an external device as incorrect connection could lead to damage.

7AUDIO OUT connector

•This connector outputs audio signals recorded on audio channels 1/2 and 3/4.

•Use the MONITOR SELECT CH1/2, CH3/4 selector switch to select output signals.

20