P2 Cards

Inserting P2 Cards

NOTE

When using the camera recorder for the first time, be sure to set the time data beforehand.

For details, refer to [Setting Date and Time of Internal Clock] (page 29).

1

Turn on the POWER switch.

2

Open the card slot cover.

Slot cover

3 Insert a P2 card in a P2 card slot.

•Press in the card until the eject button pops up. EJECT button

Insert the card with the logo facing up.

4

Push the eject button that pops up to the right.

 

• Insert a P2 card into the AG-HPX370P/AG-

HPX371E. The P2 CARD ACCESS LED for the appropriate slot indicates the status of the P2 card.

For details, refer to [P2 CARD ACCESS LED and status of P2 cards] (page 32).

P2 CARD ACCESS LED

5 Close the card slot cover.

NOTE

•To prevent cards from falling out, dust from entering and reduce the risk of exposure to static electricity, close the card slot cover before moving the camera.

•Format P2 cards only on a P2 card device.

Removing P2 Cards

1

Open the card slot cover.

2

Raise the eject button.

3

Then depress the eject button to release the P2

 

card.

Raise the eject button.

Press the raised eject

 

button to remove a P2

 

card.

Recording ChapterPlaybackand 3

31