Manipulating ChapterClips 6  

Thumbnails

REC RATE:

The recording frame rate is displayed. (Only displayed for clips recorded using native recording with the VFR function.)

5Clip Meta Data

Displays more detailed data about the clip. Use the cursor buttons to move the pointer, and press the SET button to check the detailed content. For more information on displayed metadata, see [Setting of Clip Meta Data] (page 119).

Modification of recorded clip metadata

1

Display the window for detailed clip metadata

 

that you intend to modify in the clip properties

 

window.

 

 

2

Place the cursor on the item to be modified

 

using the cursor button.

• The metadata that can be modified are shown like [CREATOR] in the following figure.

 

 

4

Press OK on the keyboard to write the modified

 

metadata on the clip and return to the metadata

 

window.

NOTE

•LOCATION (recording location data) data for a SHOOT cannot be deleted independently. Thus by setting ALTITUDE to empty will also delete the LONGITUDE and LATITUDE settings.

•The metadata for a clip with the ! incomplete clip indicator cannot be modified. Metadata on clips recorded on multiple P2 cards must be modified when all P2 cards that contain the data are inserted.

•Any MEMO with 101 characters or more cannot be modified.

P2 Card Status Display

P2 Card Status Display Settings

Select PROPERTY CARD STATUS from the thumbnail menu to set the desired indication mode (remaining free space or used memory capacity) for the P2 card status display.

1 Press the THUMBNAIL button.

•The thumbnail screen appears on the LCD monitor.

2 Press the THUMBNAIL MENU button and select PROPERTY PROPERTY SETUP P2 CARD CAP from the thumbnail menu.

•The following screen appears. Select the P2 card status display settings from the P2 CARD CAP menu option.

3 Press the SET button.

•The input window (soft keyboard) for modifying metadata is displayed.

•Use the keyboard to modify the metadata.

Use the keyboard operations described in [Checking and modifying read metadata] (page 120).

REMAIN:

Show remaining free space on the P2 card as the P2 card status display. (Factory setting)

USED:

Show used memory capacity on the P2 card as the P2 card status display.

126