Panasonic AG-HPX370P, AG-HPX371E Screen displays

Screen displays

				1				27		26						25			24
2	T C 1 2 : 3				4 : 5 6 : 2 3					1	2		1		9 9 9 min			B 9 0%				23
			F U L L
	P 2						P - P A U S E						1 - C L I P						U S E R - 1
3																					C A C	22
	1394															28
4																					F B C	21
	1 0 8 0 i
	AVC-I100
6	60			5																P 3 .2K		20
	PROXY
7																					0 dB	19
	L T . BOX
																					ND 1	18
8						8 3%			ND 1													17
9
									F E B 2 5 2 0 0 8 2 3 : 5 9 : 5 9
10	6 0 : 2 4 P N									DR S				S PO T							Z 9 9
11	HC	2 = = = = = = = =				1/ 2 5 0										F 5 . 6
	HC	1
								12				13				14	15		16

Adjustments ChapterandSettings 4rding  rfoRec

1Time code displays

Each press of the COUNTER button displays (or turns off) the indications listed below.

•(No indication)

•Counter:

Counter value (during recording only)

•TC: Time code value

TC* is indicated when the time code value cannot be correctly read from DVCPRO/DV connector input.

The colon between the seconds and the frames changes to a period (.) in drop frame mode.

•tc: Time code value (frame digits are indicated in 24 frames)

tc* is indicated when the time code value cannot be correctly read from DVCPRO/DV connector input.

The colon between the seconds and the frames changes to a period (.) in drop frame mode.

•UB: User bit values

UB* is indicated when the user bit value cannot be correctly read from DVCPRO/DV connector input.

•FR: Frame rate information for recording

•FR60I: 60i interlace mode (60 fields/s)

•FR60P: 60P progressive mode (60 frames/s)

•FR30P: 30P progressive mode (30 frames/s)

•FR24P*: 24P progressive mode (24 frames/s)

•FR24PA*: 24P advanced mode (24 frames/s)

•FR50I: 50i interlace mode (50 fields/s)

•FR50P: 50P progressive mode (50 fields/s)

•FR25P: 25P progressive mode (25 fields/s)

*In FR24P and FR24PA modes, the last digit contains the frame conversion sequence information.

NOTE

When TC, tc and UB are locked to TC IN input, the characters in their icons change to outline characters  TC    TC  .

When the HOLD button is used to temporarily freeze indications, the HOLD indication blinks.

2Warnings

•P2 : Blinks when no P2 card is inserted or the card is write protected.

•P2 FULL:

Blinks when there is no more space left on the P2 card.

• P2 LACK:

Blinks in loop rec mode when there is not enough space left on the P2 card.

• : Lights when the battery for the internal clock is depleted.

For details, refer to [Charging the internal battery] (page 160).

75