Placing the Camera-recorder inSYNCHRO SCAN Mode

To place the camera-recorder in SYNCHRO SCAN mode, follow the steps below.

1 Press the SHUTTER switch positioned at ON towards SEL, to place the camera-recorder in SYNCHRO SCAN (S/S) mode.

SHUTTER switch

SYNCHRO SCAN switch

2 In SYNCHRO SCAN mode, use the SYNCHRO SCAN switch to make stepless changes in the range between 1/60.0 s (1/50.0 s) and 1/249.8 s (1/250 0 s) (for 60i (50i) mode).

•Hold down the SYNCHRO SCAN switch to speed up the rate of shutter speed changes.

If shutter speed changes stop before the desired shutter speed has been reached, press again to continue changing shutter speeds.

Range of variation in each mode

When SYSTEM MODE is set to 1080-59.94i, 720-59.94P, 480-59.94i

•60P/60i mode: 1/60.0 to 1/249.8

•30P/30PN mode: 1/30.0 to 1/249.8

•24P/24PA/24PN mode: 1/24.0 to 1/249.8

•When the SYNC SCAN DISP option in DISPLAY SETUP is set to deg: 3.0d to 359.5d

When SYSTEM MODE is set to 1080-50i, 720-50P, 576‑50i

•50P/50i mode: 1/50.0 to 1/250.0

•25P/25PN mode: 1/25.0 to 1/250.0

•When the SYNC SCAN DISP option in DISPLAY SETUP is set to deg: 3.0d to 359.5d

•If SYSTEM MODE setting is changed, shutter speed may also be changed.

Setting the menu option SYNC SCAN DISP in the DISPLAY SETUP screen to deg provides a guide to setting and displaying shutter angle.

Adjustments ChapterandSettings 4rding  rfoRec

59