Adjustments ChapterandSettings 4rding  rfoRec

NOTE

•Pressing the RESET button when an adjustable value is selected in the setting menu EVF SETTING will return that setting to its factory default.

•The LCD monitor will appear darker than usual if the camera recorder is cold when it is turned on. The display will return to its normal brightness as it warms up.

•The issues described below are viewfinder phenomena that may occur under certain conditions but do not indicate a malfunction. Nor do they affect recording or output signals.

-Primary colors (red, blue and green) may be seen when moving eye position in the viewfinder.

-At low temperature, the screen image may have an irregular pink cast.

-When the camera is off, there may be black stripes across the screen. They disappear when the camera is turned on.

•Image lag may increase at low temperatures, but this is not a malfunction.

Emphasizing Image Outlines

Emphasizing outlines of images in the viewfinder and on the LCD monitor makes it easier to focus.

This function does not affect video output from the camera or video recorded by the camera.

1 Adjust EVF PEAK LEVEL and EVF PEAK FREQ in the DISPLAY SETUP screen.

DISPLAY SETUP

EVF PEAK LEVEL

0

 

 

LOW

EVF PEAK FREQ

EVF SETTING

 

>>>

EVF B. LIGHT

NORMAL

EVF COLOR

ON

ZEBRA1 DETECT

100%

ZEBRA2 DETECT

85%

ZEBRA2

SPOT

PUSH MENU TO RETURN

Setting the viewfnder tomonochrome mode

Set the menu option EVF COLOR to OFF in the DISPLAY SETUP screen to change the viewfinder to monochrome mode.

88