Adjustments ChapterandSettings 4rding  rfoRec

•When a cloth is used to wipe dew or dirt off the LCD monitor, discoloration may appear on the screen. This is not a malfunction. The discoloration disappears in a few minutes.

•When the camera-recorder is very cold, the video image in the LCD monitor will appear slightly darker immediately after the power is turned on. Once the interior of the camera- recorder warms up, the LCD monitor delivers normal brightness.

•The image on the LCD monitor may remain if the battery or the power plug of an external DC power supply is removed when the camera is on. This is normal and not a malfunction. This image will disappear if the camera is left idle.

•Image lag may increase at low temperatures, but this is not a malfunction.

Self-portrait Shooting

When shooting with the LCD display angled 180 degrees towards the lens, you can set the menu option SELF SHOOT to MIRROR, to horizontally flip the video image on the LCD display, and allow you to view a mirror image while shooting.

Note that only the video image on the LCD monitor is horizontally flipped, not the actual video being recorded. This function clears any status display, waveform and vectorscope display on the LCD monitor. Setting menus and thumbnail displays are not flipped horizontally.

Waveform monitor function

Assign the WFM function to a user button and press that user button to display a waveform for an image in the LCD monitor. Another press of the WFM button closes the waveform display.

•The menu option WFM (page 138) in the SW MODE screen allows you to switch between the waveform and vectorscope displays.

•The waveform display does not appear in the viewfinder.

•The waveform display does not appear when the focus assist (EXPANDED) function is used.

•The waveform display cannot be recorded.

86