Panasonic AG-HPX370P, AG-HPX371E Selecting the USER CLIP NAME recording method, To set whether or not the uploaded metadata is recorded

3

4

Use the cursor buttons to move the pointer to the item to confirm and press the SET button.

•Use this function to check loaded metadata settings.

While viewing metadata settings, use the cursor buttons to move the pointer to the desired option. Then, press the SET button.

•A soft keyboard screen is displayed, allowing you to modify the setting.

Selecting the USER CLIP NAME recording method

Select META DATA  USER CLIP NAME from the thumbnail menu to select the recording method. Two options are available: TYPE1 and TYPE2.

TYPE1(Factory defaults)

	USER CLIP NAME to be
	recorded
If clip metadata has been	Uploaded data
read in
If no clip metadata has been
read in or if the setting for	Same as GLOBAL CLIP ID
recording clip metadata has	(UMID data)
been turned off
TYPE2
	USER CLIP NAME to be
	recorded
If clip metadata has been	Uploaded data + COUNT
read in	value*1
If no clip metadata has been
read in or if the setting for	Same as CLIP NAME
recording clip metadata has
been turned off

*1 The COUNT value is indicated as a four-digit number. The COUNT value is incremented each time a new clip is captured if clip metadata has been read in and TYPE2 has been selected as the recording method.

The COUNT value can be reset using the following procedure.

Select META DATA  PROPERTY from the thumbnail menu, then select USER CLIP NAME to display the menu shown below. Select “COUNT RESET” with the cursor and press the SET button to reset the COUNT value to 1.

Manipulating ChapterClips 6  

Thumbnails

To set whether or not the uploaded metadata is recorded

Set “ON”/“OFF” in META DATA  RECORD from the thumbnail menu. The factory setting is “OFF”.

NOTE

When an 8 GB or larger capacity P2 is used and the recording session exceeds the prescribed duration (DVCPRO HD and the AVC-Intra100: about 5 minutes; AVC-Intra50: about 10 minutes) or spans more than one P2 card, the recording will automatically be split into separate clips. At this time, each clip will be provided with its own COUNT value.

121