1 Tilt the AUTO W/B BAL switch so that it is
positioned at [ABB], then release it.
•The switch returns to the central position with the black balance automatically adjusted.
2 | During adjustment, the viewfinder displays the | |
|
| following message: |
|
| ABB ACTIVE |
|
|
|
3 | The adjustment will take effect in a few seconds | |
|
| and the following message will appear: |
ABB END
•The adjusted value is automatically stored in the memory.
NOTE
•Ensure that the lens connector is connected and the lens iris is CLOSE.
•During a black balance adjustment, light is automatically cut off. However, if the lens connector comes loose or light cannot be cut off for some other reason, “ABB NG” may appear.
•Black balance adjustment is not available during recording.
•Pressing the REC button during ABB adjustment will not start recording on a P2 card.
Adjustments ChapterandSettings 4rding rfoRec
57