|
|
|
| |
| 7 | The adjustment will take effect in a few | ||
4rding rfoRec |
|
| seconds, and the following message will | |
|
| appear: | ||
|
|
| ||
|
|
| • The adjusted value is automatically stored in the | |
|
|
| selected memory (A or B). | |
|
|
| other than 0. | |
ChapterandSettings |
|
| ||
|
|
| AWB A OK 3.2K | |
|
|
| • “C TEMP+7” to “C | |
|
|
| COLOR TEMP of the scene file is set to the value | |
Adjustments |
|
|
| |
8 | If the subject’s colour temperature is lower | |||
|
than 2300K or higher than 9900K the following message appears:
• If the arrow points down ( ) the actual colour temperature is lower than the temperature indicated. If the arrow points up ( ) the actual temperature is higher than the temperature indicated.
AWB A OK 2.3K
When you have no time to adjust the white balance
Position the WHITE BAL switch at PRST.
•Turning the AUTO W/B BAL switch to AWB toggles the color temperature between 3200 K and 5600 K.
When the white balance has not been automatically adjusted
When the white balance has not been successfully adjusted, the viewfinder displays an error message.
Error message | Description |
AWB Ach | The color temperature is too high or |
(or Bch) NG | too low. |
LOW LIGHT | There is insufficient light. |
LEVEL OVER | There is too much light. |
Viewfinder displays related to white balance
See [Viewfinder Screen Status Displays] (page 74).
Setting auto tracking white balance (ATW)This camera is equipped with an auto tracking white balance (ATW) function that automatically adjusts the white balance of images in accordance with lighting conditions. The ATW function can be assigned to the WHITE BAL switch B by setting the menu option ATW in the SW MODE screen to B ch.
It can also be assigned to the USER MAIN, USER1, USER2 buttons.
For details, refer to [Assigning functions to USER buttons] (page 61).
| SW | MODE |
LOW GAIN | 0dB | |
MID GAIN | 6dB | |
HIGH GAIN | 9dB | |
ATW |
| Bch |
ATW | TYPE | 1 |
W.BAL.PRESET | 3.2K | |
USER MAIN | DRS | |
USER1 | REC REVIEW |
PUSH MENU TO RETURN
Cancelling auto tracking white balance
Press the USER button to which ATW was assigned a second time or change the WHITE BAL switch position. If ATW was assigned to the WHITE BAL switch B, the USER button cannot be used to cancel the function.
NOTE
This function does not provide a 100 % accurate white balance. The tracking performance relative to changes in ambient lighting and white balance performance have been given a degree of latitude.
Adjusting the Black BalanceThe black balance must be adjusted when:
•You use your
•Your
•The ambient temperature has changed substantially.
•The gain switchover value has been changed.
•The menu options SYSTEM MODE and REC FORMAT in
the SYSTEM SETUP screen.
Adjust the black balance before shooting to ensure optimum video quality.
a b
aAUTO W/B BAL switch
Use for automatic control of white balance.
bOUTPUT selector switch Set to CAM.
56