Adjustments ChapterandSettings 4rding  rfoRec

Setting Data Using an SD memory card

By saving up to four files of setup menu settings on an SD or SDHC memory card (optional accessory), you can create a setup card that will allow you to quickly configure camera settings before recording.

Handling SD memory cards

An SD memory card may be inserted or removed, either before or after the power is turned on.

To insert an SD memory card

Open the slot cover, insert the SD memory card (optional accessory) in the slot with the label side of the card facing upwards and close the slot cover.

NOTE

•An SD memory card must be inserted with the right side facing the slot. If the card cannot be inserted, it may the wrong side up or back-to-front. Do not force it into the slot. Check the card before reinserting it.

•Use only SD memory cards that conform to the SD standard or the SDHC standard in this camera.

Be sure to read [SD memory card precautions] (page 24) regarding SD memory handling.

To remove the SD memory card

Open the slot cover and make sure that the BUSY lamp is not on before pushing the SD memory card further into the slot and releasing it. This will cause the SD memory card to pop out of the slot. Remove the SD memory card and close the slot cover.

Formatting, Writing and Readingan SD memory card

Open the CARD FUNCTIONS screen from the setting menu to format SD memory cards, write setting data to SD memory cards and to read data stored on an SD memory card.

CARD FUNCTIONS

 

 

 

 

SCENE FILE

 

RETURN

 

USER FILE

 

CHANGE

 

SD CARD FORMAT

>>>

 

PUSH MENU TO RETURN

Use of SD memory cards in a non-SD/SDHC format formatted on a device other than this camera will display a FORMAT ERROR message at the top right of the screen. Reformat such SD cards in the camera before use.

See [To format an SD memory card] (this page).

To format an SD memory card

NOTE

SD memory cards may be formatted via the thumbnail screen. For more information, see [Formatting SD memory cards] (page 124).

1 Select SD CARD FORMAT item in CARD FUNCTIONS, then press the JOG dial button.

For details on menu operation, refer to [Using the menus] (page 129).

2 Select EXCUTE, then press the JOG dial button.

CARD FUNCTIONS

SCENE FINE

>>>

 

USER FILE

>>>

 

SD CARD FORMAT

 

RETURN

 

 

 

EXECUTE

 

 

 

 

 

SD memory cards must not be used or stored

 

PUSH MENU TO RETURN

in an environment where they may be

 

•Exposed to high temperatures/humidities;

•Exposed to water droplets; or

•Electrically charged.

For storage, the SD memory card must be kept inserted into the AG-HPX370P/AG-HPX371E with the lid closed.

90