Contents of P2 Card Status Display Settings
From the thumbnail menu, select PROPERTY CARD STATUS. The following screen appears.
When “REMAIN” is selected:
1 2
3
5
4
1
The 
mark appears if the P2 card is
2P2 Card Status (remaining free space)
The remaining memory capacity of the P2 card is indicated by a bar graph and percentage. The bar graph indicator moves to the left as the remaining free space decreases. The following indications may appear, depending on the card status:
FORMAT ERROR!:
An unformatted P2 card is inserted.
NOT SUPPORTED!:
An unsupported card is inserted in the camera.
NO CARD!:
No P2 cards are inserted.
Use the cursor button to place the cursor on the P2 card for data you want to access and press the SET button to display detailed information about the P2 card to check individual information such as the serial number and the user ID.
3P2 Card Remaining Capacity/Total Capacity Displays the P2 card remaining capacity and total capacity in minutes. The total remaining capacity for each P2 card will not show actual capacity since only time in minutes is displayed.
Note that the indicated capacity will vary according to the frame rate in native recording with VFR operation.
4Total remaining free space for the slot
Displays the total remaining free space for both slots. Please note that the remaining capacity of a write- protected P2 card is not included in the total remaining capacity.
5Warning symbol
Inserting the following type of P2 cards will display the ( 
) symbol.
RUN DOWN CARD:
The maximum number of overwrites on the P2 card has been exceeded.
DIR ENTRY NG CARD:
The directory structure on the P2 card is not supported.
For details on P2 card status indications, refer to [2. P2 Card Status (remaining free space)].
When “USED” is selected:
1 2
3
5
4
1
The 
mark appears if the P2 card is
2P2 Card Status (used memory capacity)
The used memory capacity of the P2 card is indicated by a bar graph and a percentage figure. The bar graph indicator moves to the right as the used memory capacity increases.
The following indications may appear, depending on the card status:
FORMAT ERROR!:
An unformatted P2 card is inserted.
NOT SUPPORTED!:
An unsupported card is inserted in the camera.
NO CARD!:
P2 cards are not inserted.
Use the cursor button to place the cursor on the P2 card for data you want to access and press the SET button to display detailed information about the P2 card to check individual information such as the serial number and the user ID.
3P2 Card used memory capacity/Total Capacity Displays the used memory capacity on a P2 card and the total capacity, in minutes. Because fractions are truncated, the figure shown for used memory capacity on a P2 card may differ from the figure for total capacity. The used memory capacity of a
Note that the indicated capacity will vary according to the frame rate in native recording with VFR operation.
4Total used memory capacity for all slots
Displays the total used memory capacity for both slots.
5Warning symbol
Inserting the following type of P2 cards will display the ( 
) symbol.
RUN DOWN CARD:
The maximum number of overwrites on the P2 card has been exceeded.
Manipulating ChapterClips 6
Thumbnails
127