Item

Setting

Notes

 

25M REC CH SEL

Selects the audio channels to be recorded in the

• Not available in the following

 

 

 

DVCPRO and DV formats.

conditions.

 

 

2CH: Only recorded on CH1 and CH2.

- When SYSTEM MODE is 1080-59.94i

 

 

4CH: Records on all four channels.

(1080-50i) or 720-59.94P (720-50P).

 

 

 

- When SYSTEM MODE is set to 480-

 

 

 

59.94i (576-50i) and REC FORMAT is

 

 

 

set to the DVCPRO50 codec.

 

 

 

- REC SIGNAL is set to 1394

 

 

 

(operation depends on 1394 input

 

 

 

status).

 

 

 

- When compiling to a clip in one-clip

 

 

 

recording mode.

 

 

 

 

 

7  

TEST TONE

Selects the test signal.

 

 

 

NORMAL: Outputs test tones to channels 1, 2, 3 and

 

 

 

 

 

 

 

 

4 when the OUTPUT/AUTO KNEE selector switch is

 

 

 

 

set to BARS and the AUDIO IN switch CH1 is set to

 

 

MenuOperationsChapter

 

FRONT.

 

 

 

 

 

 

 

ALWAYS: Outputs test tones to channels 1, 2, 3 and

 

 

 

 

4 at all times when the OUTPUT/AUTO KNEE selector

 

 

 

 

switch is set to BARS.

 

 

 

 

CHSEL: Outputs test tones to channels selected by

 

 

 

 

setting the AUDIO IN switch CH1 or CH2 to FRONT

 

 

 

 

and the OUTPUT/AUTO KNEE selector switch is set to

 

 

 

 

BARS. (Test tones are not output to CH3 and CH4.)

 

 

 

 

OFF: Does not output a test tone.

 

 

 

F.MIC POWER

Turns on and off the phantom power supply for the

 

 

 

 

front microphone.

 

 

 

 

ON, OFF

 

 

 

R.MIC POWER

Turns on and off the phantom power supply for the

 

 

 

 

rear microphone.

 

 

 

 

ON: Turns on the phantom power supply to the

 

 

 

 

microphone when the rear LINE/MIC/+48V switch is

 

 

 

 

set to +48V.

 

 

 

 

OFF: Does not supply phantom power to the

 

 

 

 

microphone even when the rear LINE/MIC/+48V switch

 

 

 

 

is set to +48V.

 

 

 

MONITOR SELECT

Switches the output signal to AUDIO OUT, earphones

 

 

 

 

and speaker when the MONITOR SELECT switch is

 

 

 

 

set to ST.

 

 

 

 

STEREO, MIX

 

 

 

F.MIC LEVEL

Selects the input level for the front microphone.

 

 

 

 

–40dB, –50dB, –60dB

 

 

 

R.MIC CH1 LEVEL

Selects the input level for the rear microphone

 

 

 

 

connected to CH1.

 

 

 

 

–50dB, –60dB

 

 

 

R.MIC CH2 LEVEL

Selects the input level for the rear microphone

 

 

 

 

connected to CH2.

 

 

 

 

–50dB, –60dB

 

 

 

HEADROOM

Sets the headroom (standard level).

• The default setting for the AG-

 

 

 

18dB, 20dB

HPX371E is 18 dB.

 

WIRELESS WARN

Sets whether a warning should be output when

 

 

 

 

wireless receiver reception is poor.

 

 

 

 

ON, OFF

 

 

 

WIRELESS TYPE

Selects wireless receiver type.

 

 

 

 

SINGLE: 1-channel receiver

 

 

 

 

DUAL: 2-channel receiver

 

 

 

 

• When DUAL is selected for a 1-channel wireless

 

 

 

 

receiver, CH2 and CH4 will stay mute.

 

 

 

 

 

____ indicates the factory setting

141