Chapter 5 Preparation
Power Supply
A battery or an external DC power supply can be used as | 2 Insert the battery and slide it in the direction of |
the power supply for the | |
| the arrow. |
| Using a Battery | Release lever |
The following is a list of batteries that have been tested and verified to work with the camera.
Anton/Bauer batteries PROPAC14, TRIMPACK14 HYTRON50, HYTRON140 DIONIC90, DIONIC160 IDX batteries
PAG batteries PAGL95
NOTE |
|
|
NOTE | ||
• Although other batteries may be used by changing the menu | Removing the battery | |
setting, it is recommended that you use batteries that have | Completely push down and hold the release lever | |
been tested and verified to work with camera. | on the battery holder. Then, slide the battery in the | |
• Charge the battery with the battery charger before using it. | opposite direction to the arrow while holding the lever | |
(Please refer to the battery charger’s instruction manual for | down. | |
information about charging.) |
|
|
Mounting the Battery and Setting | 3 Set the battery type. |
the Battery Type | • Select the battery type listed under BATTERY |
SELECT. Select the menu option BATTERY | |
| SELECT from the setting menu BATTERY SETUP |
| Using an Anton/Bauer Battery | screen. |
| |
1 Mount an Anton/Bauer battery. |
|
Power supply output connector for lighting |
|
(DC OUT 12 V 4.5 A) |
|
Anton/Bauer Battery
Lighting control switch
NOTE
The Anton/Bauer battery holder includes both a power supply output connector for lighting and a lighting control switch, which are convenient when attaching a light. Please contact Anton/Bauer for information about the lighting system.
Preparation Chapter 5
95