Maintenance ChapterInspectionsand 9  

Maintenance

Eyepiece Care
When the outer lens is soiled

Remove surface dust using a soft brush or blower brush before cleaning with a commercially available lens cleaner (or lens cleaning paper).

When dust adheres to internal lenses or the interior of the eyepiece

Detach the eyepiece to remove the dust.

Use a soft brush or blower brush to remove surface dust.

NOTE

Do not use thinner or other mineral solvents to remove dust or soiling.

Outer lens

Eyepiece

Eyepiece lock button

Detaching the eyepiece

Slide the eyepiece lock button and turn the eyepiece clockwise.

Mounting the eyepiece

Line up the projection on the eyepiece lock button with the mark on the viewfinder and slide in the eyepiece. Turn the eyepiece counterclockwise until the lock knob clicks into place.

NOTE

When outdoors, never carry or set up the camera with the eyepiece facing up to prevent sunlight, which could damage the camera, from entering.

Cleaning Inside the Viewfnder

Detach the eyepiece to remove dust from the LCD screen inside the viewfinder.

For details, refer to [Detaching the eyepiece] (this page). Use a soft brush or blower brush to remove dust from the LCD screen.

NOTE

Do not use thinner or other mineral solvents to remove dust or soiling.

Charging the internal battery

The internal battery preserves the date and time settings. If the camera is left unused for half a year or longer, the internal battery may become depleted and the (battery icon) may appear in the viewfinder and on the LCD monitor. Should this happen, connect an external DC power supply or battery, and leave the camera turned off for about four hours to fully charge the internal battery. Then reset the time and date.

Replace the internal battery if appears after charging. Consult your distributor.

160