3 Select YES in the confirmation screen and press the JOG dial button.

•“SD CARD FORMAT OK” appears and the SD memory card is formatted.

NOTE

Check that no important data remains on a card before formatting since data erased by formatting cannot be recovered.

The card will not be formatted if the following message appears when the JOG dial button is pressed:

Error message

Remedy

 

 

SD CARD FORMAT NG

 

NO CARD

Insert an SD memory card.

(No SD memory card

 

inserted.)

 

 

 

SD CARD FORMAT NG

 

ERROR

The card may be defective.

(SD memory card cannot be

Replace the card.

formatted.)

 

 

 

SD CARD FORMAT NG

 

WRITE PROTECT

Remove the card and

(SD memory card is write-

cancel the protect.

protected.)

 

 

 

SD CARD FORMAT NG

The SD memory card is

CANNOT ACCESS

not accessible. When the

(SD memory card not

current access operation

accessible).

ends, reformat the card.

 

 

How to Use Scene File Data

• Each position of the SCENE FILE dial stores settings for

4rding rfoRec

specific shooting situations.

 

• When shooting, you can retrieve the necessary file

 

instantly using scene file dial.

 

• You can also use menu options to change set scene file

ChapterandSettings

values. A modified scene file can be saved to each scene

 

file dial position.

 

 

Adjustments

SCENE FILE dial

•Note that changing scene files during recording will not change VFR and frame rate settings. To make such changes, set the camera to recording standby status.

Factory setting

• F1: SCENE

File suitable for normal shooting.

• F2: SCENE FLUO.

File suitable for shooting under fluorescent lights, ie. indoors.

• F3: SCENE SPARK

File suitable for SD shooting with a greater range of resolution, coloring and contrast.

• F4: SCENE B-STR

File for increasing the contrast of dark areas, such as when shooting sunsets.

• F5: SCENE CINE V

File suitable for shooting movie-like scenes where the contrast is to be emphasized.

• F6: SCENE CINE D

File suitable for shooting movie-like scenes where the dynamic range is to be emphasized.

NOTE

Changes to scene files do not affect SYSTEM MODE settings. Use the SYSTEM SETUP screen to make such changes.

91