16Zoom position display

Zoom positions are indicated in a range from Z00 (maximum wide angle) to Z99 (maximum zoom).

17Recommended ND filter display

This indicates the most suitable ND filter to use under current shooting conditions.

18ND filter display

•This indicates the selected ND filter.

•An ND -- indication means that the ND FILTER switch is incorrectly set (a position other than ND1 to ND4). Check ND FILTER switch position.

19Gain display

Indicates the gain value set using the video amplifier.

20WHITE BAL switch position indication

Indicates the currently selected switch position and also white balance operation when AWB is preset. In ATW (Auto Tracking White Balance) mode, ATW is also indicated and LOCK is displayed when the function is locked.

21FBC indication

Appears when the FBC function is engaged.

22CAC indicator

Indicates that the chromatic aberration function of the lens is operating.

23Scene file name display

Indicates the name of currently selected SCENE FILE (F1 to F6).

24Remaining battery charge

As the remaining battery charge drops, the display changes as follows: .

When the battery is completely discharged,

(  ) blinks.

(When the AC adapter is being used, a display

other than may appear: this is not a sign of malfunctioning.)

Batteries that indicate battery level in % (percent) Such batteries indicate remaining battery level as follows.

•B%: 10 %~99 %

Indicates the remaining battery level in %.

•MAX: Indicates that the battery is fully charged.

•EMP: Indicates that the remaining battery level is less than 10 %.

Batteries that do not indicate capacity in % (percent) Such batteries indicate the battery level in voltages.

• 13.5 V: Indication of current battery voltage.

25Media remaining memory display

•Set the menu option P2CARD REMAIN in the DISPLAY SETUP screen to ONE-CARD to display the remaining time on the P2 card being recorded and show the number of the slot it resides in on the left. TOTAL displays the remaining time on both cards.

•In a mode check, ONE-CARD and TOTAL are alternately displayed.

•This display does not appear while remaining memory is calculated and when the camera is in USB device mode.

•A mode check during loop recording displays the standard recording time available to loop recording.

•Indicates remaining time in 1-minute increments from 0 to 999 minutes. 999 minutes and longer time periods are also indicated as 999 minutes.

•The display blinks when 2 minutes or less time is left.

26Media information display

Indicates the slots that contain P2 cards and general information on the media.

•1 On:

 

 

 

P2 card ready for recording

•

1

lights green:

 

 

 

P2 card selected for recording

•

1

flashes:

 

 

 

The card is being recognized

•

-

:

No card inserted

•

P

:

Write-protected

•

F

:

Full

•

X

:

Cannot recognize

•

E

:

P2 card in an invalid format (formatting will

 

 

 

take care of this problem)

•

o

:

P2 card slot contains a PROXY card.

27Recording and playback

•REC: Recording

•PAUSE:

Recording standby

•H : Playback pause

• Q : Play

• Y (T ) :

Fast-forward/fast-forward playback (fast- reverse/fast-reverse playback)

• 4X Y (4X T ) :

4x speed search

• CLIP H Q (CLIP W H ) :

Clip forward (clip reverse), cue up of single clips

• CLIP&T H Q (CLIP&T W H ) :

Cue forward (cue back) to the start point of clips and text memo points (when the menu option SEEK SELECT is set to CLIP&T in the OTHER FUNCTIONS screen)

•START: Indicates that recording has started for a new clip in one-clip recording mode.

•END: Indicates that compiling to a clip has stopped in one-clip recording mode.

During DISPLAY OFF, only the REC, START, and END displays are shown at the top right. (Also displayed at top right, when pre-recording, loop recording, interval recording or one-shot recording is set.)

Adjustments ChapterandSettings 4rding  rfoRec

77