Adjustments ChapterandSettings 4rding  rfoRec

3 Use CURSOR buttons to set the user bits.

 

UB PRESET

 

 

0

0

0

0

0

0

0

0

+/- : PUSH /

 

 

SEL : PUSH

 

/

 

 

PRESET : PUSH SET

Q button: Shifts the target (highlighted) digit to the right.

W button: Shifts the target (highlighted) digit to the left.

E button: Increases the highlighted number by one.

R button: Decreases the highlighted number by one.

SET button: Confirms the set user bits.

•Pressing the RESET button while setting the user bits will reset any user bit setting to 0.

4 Press the SET button to confirm the user bit value, and position the TCG switch at F-RUN or R-RUN.

NOTE

Changing the TCG switch setting without pressing the SET button disables the set value.

5 Open the setting menu RECORDING SETUP screen and set the menu option UB MODE to USER.

Retaining the user bits

The data set for the user bits are automatically saved and retained even if the video camera-recorder is turned off.

Frame rate information recorded in user bits

The frame rate value of video data captured and recorded at a frame rate set in the menu option FRAME RATE

or other options in the SYSTEM SETUP screen can be recorded in the user bits and be used in editing equipment (computer editing software).

This type of data is recorded in VITC UB at all times. Setting the setting menu UB MODE to FRM RATE, records the information also to the user bits.

In playback of clips recorded in native mode, the same frame rate information as that obtained in playing back the user bits in the VIDEO AUX area is also output to the user bits in the subcode area.

Frame rate information

Frame rate, video pull-down and time code user bits are related as described below.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Verification

Fixed

 

Media management data

information on

value

 

• Update frame flag, active

the right-hand

 

 

 

 

 

 

frame flag

six digits

 

 

 

 

 

 

• REC mark

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Sequence No. 24P, 24PA: 0-4

Other than above: locked at F

Camera capture mode

Example:

•60i: 600

•60P: 608

•30P: 308

•24P: 248

•24PA: 24C

•24PN: 24C (recording)

•50i: 502

•50P: 50A

•25P: 25A

•P: 9 (720P/30PN or 60P VFR)

•P: D (720P/24PN VFR recording)

•P: B (720P/25PN or 50P VFR)

1080i, 480i, 576i mode

Frame rate: 24P over 60i (2:3)

  First field of updated frame rate

Time code digit

00 01 02 03 04 05 06 23 24 25 26 27 28 29

Video

Ao AeBo Be Bo Ce CoDe Do De Ao Ae Bo BeCo De Do De Ao Ae Bo Be Bo Ce Co De Do De

Sequence No.

0

1

2

3

4

0

1

3

4

0

1

2

3

4

Updated frame information

10 10 01 01 00 10 10 01 00 10 10 01 01 00

68