Setting of Proxy (optional)

Installing the video encoder card (AJ-YAX800G, optional accessory) in P2 card slot 2 makes it possible to set up the proxy recording function.

The video encoder card is not recognized when inserted if the power for the unit is turned on. Insert the video encoder card after turning off the power for the unit.

Select OPERATION DEVICE SETUP PROXY from the thumbnail menu to specify the setting.

For details on how to install and set up the video encoder card, refer to the User’s Guide of the video encoder card.

NOTE

•When “PROXY CARD ERROR” is indicated in the viewfinder, either check the video encoder card or set the unit so that proxy recording is not performed.

•The proxy function cannot be set when recordings can still be compiled to a previous clip in one-clip recording mode (i.e., when “1CLIP” is displayed). Close the menu and press the STOP button for about 2 seconds to stop the clip compiling process, and then perform the operation.

Formatting a P2 Card

1 Press the THUMBNAIL button.

•The thumbnail screen appears on the LCD monitor.

2 Press the THUMBNAIL MENU button and select OPERATION FORMAT from the thumbnail menu.

•When the screen shown below appears, select the slot number of the P2 card you want to format and press the SET button.

•Select EXIT if formatting is not required.

 

 

3

The following screen appears. Use the cursor

 

buttons and the SET button to select YES.

• The selected P2 card is formatted.

NOTE

Check that no important data remains on a card before formatting since data erased by formatting cannot be recovered.

Manipulating ChapterClips 6  

Thumbnails

123