4

The following screen appears. Use the cursor

 

buttons and the SET button to select YES.

6  

 

 

 

 

 

 

 

 

 

 

 

ChapterClips

 

 

• The clip is deleted. All selected clips (in blue

 

 

 

 

 

 

frames) are deleted by this operation.

Manipulating

 

 

 

 

NOTE

 

 

 

 

To interrupt deleting, press the SHIFT and EXIT buttons or

 

 

the SET button to cancel the operation.

 

 

Partially deleted clips cannot be restored by canceling.

 

 

 

 

 

 

 

Restoring Clips

Thumbnails

 

Restores clips that are defective as a result of sudden

 

powering-down during recording, or removal of the P2 card

 

 

 

 

being accessed.

 

 

 

 

 

NOTE

 

 

Only those clips with yellow defective clip indicators can be

 

 

restored. Delete the clips with red defective clip indicators. If

 

 

the clip cannot be deleted, format the P2 card.

 

 

During restoration of the clips, however, the defective-clip

 

 

indicator may change from yellow to red, resulting in inability

 

 

to restore the clips.

Reconnection of Incomplete Clips

Incomplete clips may be generated when clips recorded on multiple P2 cards (connected clips) are separately copied to different cards. The reconnection function generates one clip (the original, connected clip) from incomplete clips.

1 Press the THUMBNAIL button.

•The thumbnail screen appears on the LCD monitor.

2 Use the cursor and SET button to select incomplete clips to reconnect.

•Usually, thumbnails of incomplete clips (clips with marker) are displayed in line.

3 Press the THUMBNAIL MENU button and select OPERATION RE-CONNECTION from the thumbnail menu.

•When a confirmation screen asks you to confirm that you want to reconnect the clip, use a cursor button and the SET button to select YES if you want to reconnect the clip.

NOTE

Clips that are connected as a group must be grouped together or they will be displayed as incomplete clips.

Copying Clips

Selected clips can be copied to the P2 card in the desired slot or SD memory card.

 

 

 

Press the THUMBNAIL button.

1

Press the THUMBNAIL button.

1

•The thumbnail screen appears on the LCD monitor.

•The thumbnail screen appears on the LCD monitor.

2

3

Use the cursor buttons to move the pointer over the clip you want to restore (defective clips are indicated by defective clip indicators).

Press the SET button to select the clip.

Press the THUMBNAIL MENU button, and select OPERATION REPAIR CLIP from the thumbnail menu.

•When a confirmation screen asks you to confirm that you want to repair the clip, use a cursor button and the SET button to select YES if you want to restore the clip.

2 Use the cursor buttons to move the pointer to the desired clip and press the SET button.

NOTE

Clips cannot be copied when recordings can still be compiled to a previous clip in one-clip recording mode (i.e., when “1CLIP” is displayed). Close the menu and press the STOP button for about 2 seconds to stop the clip compiling process, and then perform the operation.

118