Panasonic AG-HPX370P, AG-HPX371E Warning and Error Display for Thumbnail Operation and USB HOST MODE

Warning and Error Display for Thumbnail Operation and USB HOST MODE

Item	Message	Description	Measure
	CANNOT ACCESS!	Data cannot be accessed because it is	Restore media and clips to normal state
		corrupted or for other reasons.	before access.
		Any thumbnails that cannot be produced
	CANNOT CHANGE!	on the AVC-Intra 100 or AVC-Intra 50 and	Set SYSTEM MODE according to the clips.
		displayed in gray cannot be changed at the
		text memo position.
	CANNOT COPY!	Images cannot be copied.	Check the conditions for copying.
	CANNOT DELETE !	P2 card contains contents version	Match devices and contents versions, and
		mismatches or bad clips.	repair bad clips.
	CANNOT FORMAT!	P2 card problem prevents formatting.	Check P2 card.
	CANNOT	A clip that does not span multiple P2 cards	Check selected content.
	RECONNECT!	cannot be reconnected.
	CANNOT REPAIR!	Data cannot be repaired since content that	Check selected content.
		cannot be repaired is selected.
	CANNOT REPAIR IN	Some of the selected clip could not be	—
	SELECTION!	repaired.
	CARD FULL!	The P2 or SD card is full.	Insert media with sufficient capacity.
	INVALID VALUE!	Entered data was invalid.	Enter data in a valid range.
	LACK OF REC	There is not enough recording capacity left	Insert a card with sufficient recording
	CAPACITY!	on the card.	capacity.
		A shot mark will be added to the clips	Insert all P2 cards with recorded clips,
			and confirm that the	!	incomplete clip
	MISSING CLIP!	recorded on multiple P2 cards when all P2
			indicators disappear, and then add shot
		cards are not inserted yet.
Thumbnails			marks.
	NO CARD!	No P2 or SD card is inserted.	Insert compatible media.
	NO COPY TO SAME	A clip cannot be copied to the card storing	Copy the selected clip to a card that does
	CARD!	the original clip.	not contain the original clip.
	NO FILE!	The designated file is not found.	Check the file.
	NO SD CARD!	No SD card is inserted.	Insert an SD card.
	SAME CLIP IS	The clip cannot be copied because a clip	Confirm the selected clip and release
		that has already been copied and the original	either the source clip or the destination
	SELECTED!
		clip have been selected.	clip and then execute the copy operation.
	TOO MANY CLIPS!	Too many clips are selected.	Reduce the number of selected clips.
			• Match devices and contents versions.
	UNKNOWN	P2 card contains contents version	• If corrupted clips exist (including
			corrupted clips that are located on the
	CONTENTS FORMAT!	mismatches or corrupted content.
			copy destination), repair the corrupted
			clips or delete them.
			Use UTF-8 for the metadata character
	UNKNOWN DATA!	The metadata character code is invalid.	code. Use the viewer to enter correct
			characters.
			The user clip name plus the counter
	USER CLIP NAME	Characters in the clip name had to be	value can only contain up to 100
			bytes. Characters in the clip name are
	MODIFIED!	deleted in adding the counter value.
			automatically deleted when the total
			exceeds 100bytes.
	WRITE PROTECTED!	The P2 or SD card is write protected.	Insert write-enabled media.
	CANNOT CHANGE!	[PERSON] will be entered while the text	Enter [TEXT] before entering [PERSON].
Soft		memo is not available.
keyboard	CANNOT SET! INVALID	The entered value is incorrect.	Change the value.
	VALUE!
			(Continued on the next page)

Maintenance ChapterInspectionsand 9  

163