Preparation Chapter 5
Mounting and Adjusting the Lens
| Mounting the Lens | 3 |
1 | Raise the lens clamping lever and remove the |
| mount cap. |
Lens Clamping Lever
4
| Mount Cap |
|
|
2 | To mount the lens, align the indentation at the |
| top center of the lens mount with the center |
| mark of the lens. |
Mark
5
Lower the lens lever to firmly tighten the lens.
Secure the cable through the cable clamp, and plug it into the LENS connector.
Cable clamp
LENS Connector
For details on the current provided by the lens terminal, refer to page 175.
Adjust the lens flange back.
For details, refer to [Adjusting the Lens Flange Back] (page 99).
NOTE
•Please refer to the lens instruction manual for guidance on lens handling.
•When the lens is removed, install the mount cap to protect the device.
98