Item

Setting

Notes

 

 

ONE SHOT TIME

Sets the duration for one-shot recording.

• Available only when REC FUNCTION

 

 

 

1frm, 2frm, 4frm, 8frm, 16frm, 1s

is set to ONE SHOT.

 

 

 

For details, refer to [One-shot recording (ONE SHOT

 

 

 

 

REC)] (page 43).

 

 

 

INTERVAL TIME

Sets the time interval of interval recording.

• Available only when REC FUNCTION

 

 

 

2frm, 4frm, 8frm, 16frm, 1s, 2s, 5s, 10s, 30s, 1min,

is set to INTERVAL.

 

 

 

5min, 10min

 

 

 

 

For details, refer to [Interval recording (INTERVAL

 

 

 

 

REC)] (page 43).

 

 

 

START DELAY

This delays the start of interval and one-shot recording

• Available only when REC FUNCTION

 

 

 

by about 1 second.

is set to INTERVAL or ONE SHOT.

 

 

 

ON, OFF

 

 

7  

PREREC MODE

Sets PRE REC.

• Not available in the following

 

 

ON, OFF

conditions.

 

 

 

 

 

For details, refer to [Pre-recording (PRE REC)]

- When REC SIGNAL is set to 1394

 

 

 

(page 42).

- When SYSTEM MODE is set to 720-

 

MenuOperationsChapter

 

 

59.94P (720-50P) and VFR is set to

 

 

 

 

 

 

 

ON.

 

 

 

 

- When REC FORMAT is set to native

 

 

 

 

recording.

 

 

 

 

- When SYSTEM MODE is set to 1080-

 

 

 

 

59.94i or 480-59.94i; and CAMERA

 

 

 

 

MODE is set to 24P or 24PA.

 

 

 

 

- When REC FUNCTION is set to

 

 

 

 

something other than NORMAL.

 

 

TC MODE

Sets count correction when using the internal time

• This item is not displayed when

 

 

 

code generator.

SYSTEM MODE is set to 50 Hz.

 

 

 

DF: Drop frame time code

• Not available when operating at 24P,

 

 

 

NDF: Non drop frame time code

24PA and 24PN is set to ON. Then

 

 

 

For details, refer to [Setting the Time Code] (page 69).

NDF is used at all times.

 

 

UB MODE

Sets the data recorded in the camera user bits.

 

 

 

 

USER, TIME, DATE, EXT, TCG, FRM.RATE

 

 

 

 

For details, refer to [Setting user bits] (page 67).

 

 

 

ONE CLIP REC

Sets one-clip recording mode.

• Not available in the following

 

 

 

ON, OFF

conditions.

 

 

 

For details, refer to [One-clip recording] (page 44).

- When REC FUNCTION is set to

 

 

 

 

something other than NORMAL.

 

 

 

 

- When REC SIGNAL is set to 1394.

 

 

 

 

- When VFR is set to ON

 

 

START TEXT MEMO

Sets whether to automatically add a text memo at the

• Not available when REC FUNCTION is

 

 

 

recording start position each time you start recording.

set to something other than NORMAL.

 

 

 

ON, OFF

• The text memo that is added when this

 

 

 

 

is set to ON indicates the recording

 

 

 

 

start position.

 

 

 

 

For details on recording the text memo

 

 

 

 

as text information, refer to [Setting of

 

 

 

 

Clip Meta Data] (page 119).

 

 

____ indicates the factory setting

139