Item

Setting

Notes

 

 

 

1394 AUDIO OUT

Selects audio channel output to 1394 OUT in DVCPRO

• Available only when SYSTEM MODE

 

 

 

 

 

or DV mode.

is set to 480-59.94i (576-50i) and REC

 

 

 

 

 

CH1/CH2, CH3/CH4

FORMAT is set to DVCPRO or DV.

 

 

 

 

 

 

 

 

 

 

 

OUTPUT SEL screen

 

 

 

 

 

 

 

 

 

 

 

 

Item

Setting

Notes

 

 

 

SDI SELECT

Sets the signal format type output from the SDI OUT

• Not available when SYSTEM MODE is

 

7  

 

 

 

connector.

set to 480-59.94i (576-50i). Then 480i

 

 

 

 

AUTO: Depends on SYSTEM MODE setting.

(576i) is output at all times.

 

 

 

 

 

1080i*1: Outputs 1080-59.94i (1080-50i) also when

 

 

 

 

 

 

 

 

 

 

 

 

SYSTEM MODE setting is 720-59.94P (720-50P).

 

 

MenuOperationsChapter

 

 

 

480i (576i): Output is locked to 480-59.94i (576-50i)

 

 

 

 

 

regardless of SYSTEM MODE setting.

 

 

 

 

 

 

 

 

 

 

SDI METADATA

Sets metadata (UMID) superimposition onto SDI OUT.

 

 

 

 

 

 

ON: Superimposes metadata.

 

 

 

 

 

 

OFF: Does not superimpose metadata.

 

 

 

 

SDI EDH

Sets EDH superimposition when SDI OUT is an SD

 

 

 

 

 

 

signal (480i (576i)).

 

 

 

 

 

 

ON: Superimposes EDH.

 

 

 

 

 

 

OFF: Does not superimpose EDH.

 

 

 

 

DOWNCON MODE

Sets downconverter output (VIDEO OUT and 480i

• Not available when SYSTEM MODE is

 

 

 

 

 

(576i) SDI OUT) in HD mode (1080i, 720P).

set to 480-59.94i (576-50i).

 

 

 

 

 

SIDE CROP, LETTER BOX, SQUEEZE

 

 

 

 

VIDEO OUT CHAR

Specifies whether or not characters are superimposed

• This setting is disabled when a remote

 

 

 

 

 

on VIDEO OUT signals.

control unit (AJ-RC10G) or extension

 

 

 

 

 

ON: Superimposes characters.

control unit (AG-EC4G) is connected,

 

 

 

 

 

OFF: Does not superimpose characters.

in which case the settings on the

 

 

 

 

 

 

remote control unit or extension control

 

 

 

 

 

 

unit have priority.

 

 

 

VIDEO OUT ZEBRA

Specifies whether or not zebra pattern is

 

 

 

 

 

 

superimposed on VIDEO OUT signals.

 

 

 

 

 

 

ON: Displays a zebra pattern also on images output

 

 

 

 

 

 

via the VIDEO OUT connector.

 

 

 

 

 

 

OFF: The zebra pattern is not displayed in video

 

 

 

 

 

 

output from the VIDEO OUT connector.

 

 

 

 

TC OUT

Sets the time code type output from the TC OUT

 

 

 

 

 

 

connector.

 

 

 

 

 

 

TCG: Outputs the time code generator value of the

 

 

 

 

 

 

camera at all times.

 

 

 

 

 

 

TCG/TCR: Outputs time code generator value during

 

 

 

 

 

 

camera recording and outputs the played back time

 

 

 

 

 

 

code during video playback.

 

 

 

 

TC VIDEO SYNCRO

Sets the delay of time code output from the TC OUT

 

 

 

 

 

 

connector.

 

 

 

 

 

 

TC IN: Does not delay output of input to TC IN

 

 

 

 

 

 

connector.

 

 

 

 

 

 

VIDEO OUT: Outputs the time code in line with delay

 

 

 

 

 

 

of video output from the VIDEO OUT connector.

 

 

*1 Use 1080i selected in a SYSTEM MODE setting of 720-59.94P (720-50P) for checking video.

____ indicates the factory setting

142