Panasonic KX-TA308 operating instructions Before Operating Operating example, Operations

1.1Before Operating

Operating example

Example: “Interrupting an Existing Call (Executive Busy Override)”, Executive Busy Override — Extension

Applicable telephone:

A PT (Proprietary Telephone) user can follow the operating steps below.

Applicable telephone:

Any Telephone (PT and SLT) user can follow the operating steps below.

	Interrupting an Existing Call (Executive Busy Override)		Main feature title
Executive Busy Override — Extension		Sub-feature title

Basic Operations

Allows you to connect to an existing intercom (extension) call.

System Programming is required to use this feature.

Any Telephone

If you make an intercom call and while hearing a busy tone

A three-party conference

3	is now established.
Dial 3.	Confirmation tone (optional)

To leave the conference

Any Telephone

The other two parties continue their conversation.

Hang up or press SP-PHONE.

Feature description

Operation steps

To terminate one party and talk to the other

	PT
	CO		INTERCOM
		or
	Press the CO or INTERCOM			Confirmation tone (optional)
	of the party to remain connected.
	• If all three parties are extensions, this operation is not available.
!
	• This feature does not work when “Data Line Security” or “Executive Busy Override Deny”				Additional
		is set at either or both of the other parties.
	•	When a 2-party call is changed to a 3-party call or vice versa, a confirmation tone is sent to			information
		all parties. The tone can be disabled.

☞• 1.3 Making Calls, ‘Denying “Interrupting an Existing Call”(Executive Busy Override Deny)’

•1.7 Useful Features, “Conference (3-party)”

•1.7 Useful Features, “Data Line Security”

•See the Installation Manual, Section 3, “Executive Busy Override”.

The feature and program reference

!	•	If your telephone is not noted in the operation steps (ex. only “PT” is noted and you are
		using a single line telephone), this means your telephone cannot execute that feature.
	•	If your telephone can perform several operations for one feature, you can select the method
		according to your needs.

Operations 1-3