1.6Before Leaving Your Desk
Locking Your Telephone (Electronic Station Lockout)
Allows you to lock your extension so that other users cannot make outside calls from your extension.
Locking
Any Telephone
same code
7 | 7 | lock code | lock code | # |
|
Lift the handset or press Dial 77. | Enter a | Dial #. Confirmation tone | Hang up or press | ||
| (0000 through 9999) twice. | and dial tone |
• Single line telephone users can dial “0” instead of “#”.
Unlocking
Basic Operations
Any Telephone
| 7 | 7 |
Lift the handset or press | Dial 77. | |
|
|
lock code | # |
|
Enter the same lock code | Dial #. Confirmation tone | Hang up or press |
you used to lock the | and dial tone | |
extension. |
|
|
|
| • Single line telephone users can dial “0” instead of “#”. | |
! |
|
|
|
• | If another user tries to access an outside (CO) line and presses a dial key from a locked | ||
| extension, the user will hear a reorder tone and for PT users “Restricted” is shown on the | ||
|
| display. However, calls can be made at a locked extension depending on system | |
|
| programming. System programming determines which COS number applies to calls at the | |
|
| locked extension. |
•An extension assigned as an operator or manager can cancel this function for all extensions (Electronic Station Lockout — CANCEL ALL).
•“Remote Station Lock Control” overrides this feature. If the operator or manager sets Remote Station Lock on the extension you have already locked, you cannot unlock it.
• The lock code must be 4 digits and must not have the “#” and “ ” buttons.
•You can make intercom calls and receive intercom or outside calls at a locked extension.
•You can make outside calls depending on the toll restriction class.
☞• 1.8 Operator/Manager Service Features, “Electronic Station Lockout — CANCEL ALL”
•1.8 Operator/Manager Service Features, “Remote Station Lock”
•See the Installation Manual, Section 3, “Toll Restriction — Station Lock Boundary Class”.
•See the Installation Manual, Section 3, “Station Lock”.