Panasonic KX-TA308 - page 69

1.7 Useful Features

Operations 1-61

Advanced Operations

• A conference call can also be established by “Executive Busy Override”.

• When a 2-party call is changed to a 3-party call or vice versa, a conﬁrmation tone is sent to

all parties.

• Pressing a CO button which is not in the conference allows you to exit from the conference,

leaving the other two parties connected unless they are both outside (CO) lines.

If the other parties are both outside (CO) lines, they will be disconnected.

• If the third party does not answer, press the CO button or INTERCOM button to return to

the second party.

• To change a 3-party conference to a 5-party conference, refer to “Conference (5-party)”.

• You can return to the original party before the third party answers by ﬂashing the

hookswitch.

• If “Hold-2” or “Hold-3” is assigned in System Programming, you must dial “20” after

ﬂashing the hookswitch.

• 1.2 Proprietary Telephone Settings, “Customizing the Buttons on Your Telephone” ,

CONFERENCE Button

• 1.3 Making Calls, “Interrupting an Existing Call (Executive Busy Override)”,

Executive Busy Override — Extension,

Executive Busy Override — Outside (CO) Line

• See the Installation Manual, Section 3, “Conference (3-party)”.

SLT

SLT

PT

PT

PT

☞

!

!

Contents

Main System Components Thank you for purchasing a Panasonic Telephone System. Page Precautions For your future reference ! Section 1 Operations Basic Operations Advanced Operations Operator / Manager Operations DSS Console Operations Section 2 Appendix Index Page 1-2 1.1 Before Operating What kind of telephone do you use? Description of the Symbols Used in this Manual Operations 1-3 1.1 Before Operating Operating example ! Interrupting an Existing Call (Executive Busy Override) Executive Busy Override Extension To exit the Programming Mode To enter the Programming Mode When storing data Preferred Line Assignment Outgoing Customizing Your Telephone Functions 1-6 P ROGRAMMING I Outside (CO) Line Ringing Selection Preferred Line Assignment Incoming O Proprietary Telephone Setting Data Default Set Call Waiting Tone Selection Intercom Alert Assignment Customizing the Buttons on Your Telephone Changing the Flexible Buttons Line Access Buttons Single-CO (S-CO) Button Other CO (O-CO) Button 1-10 DSS (Direct Station Selection) Button Group-CO (G-CO) Button One-Touch Dialing Button )( CONFERENCE Button 1-12 Log-In/Log-Out Button SAVE Button FWD/DND (Forward/Do Not Disturb) Button Restoring the MESSAGE Button )( One-Touch Access for System Features To Access Programming To adjust the handset receiver volume Volume Control Handset Receiver/Ringer/Speaker To adjust the ringer volume Display Contrast Adjustment Page 1-16 Intercom Calling Using the handset Using the Speakerphone Using a DSS (Direct Station Selection) button Outside Calling Calling an Operator (Operator Call) 1-18 Making Outside Calls Using Automatic Line Access Making Outside Calls Using Individual Line Access Making Outside Calls Using Individual Outside (CO) Line Group Access Flash/Recall 1-20 Switching from handsfree to the handset mode Handsfree Operation Switching from the handset to handsfree mode Making Emergency Calls (Emergency Call) 1-22 Dialing by Simply Pressing a Button (One-Touch Dialing) Dialing with System Speed Dialing (System Speed Dialing) Dialing with Personal Speed Dialing (Personal Speed Dialing) 1-24 Storing a phone number Page 1-26 Dialing by Simply Going Off-Hook (Pickup Dialing) Storing a phone number Redialing Automatically (Automatic Redial) Redialing the Last Number Dialed (Last Number Redial) 1-28 Redialing the Saved Number (Saved Number Redial) Storing Sending a Call Waiting Tone to a Busy Extension (Busy Station Signaling BSS) 1-30 Answering an intercom recall Answering an outside (CO) line recall To terminate one party and talk to the other Interrupting an Existing Call (Executive Busy Override) Executive Busy Override Extension To leave the conference 1-32 Executive Busy Override Outside (CO) Line To terminate one party and talk to the other To leave the conference Denying Interrupting an Existing Call (Executive Busy Override Deny) 1-34 Receiving Calls Handsfree Answerback 1-36 Picking up a Call Ringing at Another Extension (Call Pickup) Directed Call Pickup Group Call Pickup Denying/allowing your call to be picked up (Call Pickup Deny) Call Retrieving from a TAM (Telephone Answering Machine) 1-38 Placing a Call on Hold (Call Hold) Placing a call on hold Retrieving a call on hold Placing a call on exclusive hold Placing a Call on Hold Exclusively (Exclusive Hold) Retrieving a call on exclusive hold 1-40 Retrieving a Call on Hold (Call Hold Retrieve) Retrieving an outside call on hold Retrieving an intercom call on hold Placing a Call in System Parking Area (Call Park) Retrieving a parked call 1-42 Transferring a Call to an Extension (Call Transfer to Extension) Unscreened Call Transfer Screened Call Transfer During a conversation The call is transferred. The other party is placed on hold. Call Transfer using a DSS button With Transfer mode Without Transfer mode 1-44 Transferring a Call to an Outside (CO) Line (Call Transfer to Outside (CO) Line) Operations 1-45 Basic Operations The current call is disconnected. The current call is disconnected. or Call Waiting While hearing a Call Waiting tone Setting / Canceling for intercom calls To talk to the new caller by terminating the current call To set. To cancel. 1-46 To talk to the new party by holding the current call Call Splitting Having a conversation while another call is on (exclusive) hold 1-48 Paging All extensions Group External All extensions & External Answering a Page 1-50 Transferring after paging (Paging and Transfer) Turning off the Microphone (Microphone Mute) Paging Deny 1-52 Forwarding a Call (Call Forwarding) T YPE D All Calls 1-54 Busy or No Answer 17 extension no. # 2 The FWD/DND (CO) indicator light ashes red slowly. To Outside (CO) Line Follow Me 1-56 Canceling Call Forwarding at the destination extension Follow Me (All Calls) only Cancel Canceling Call Forwarding at your (original) extension The FWD/DND (CO) indicator light turns off. The FWD/DND (CO) indicator light turns off at your extension. Locking Your Telephone (Electronic Station Lockout) Locking Unlocking P 1-58 Showing Your Message on the Calling Partys Display (Absent Message Capability) Operations 1-59 Conference (3-party) Establishing a conference SLT During a 2-party conversation Page Page 1-62 Conference (5-party) Establishing a conference Operations 1-63 During a 3-party conversation To change to a 5-party conference during a 3-party conference 1-64 Operations 1-65 Advanced Operations Leaving a Message Notication (Message Waiting) Canceling using the MESSAGE button Leaving a message notication 7 0 1 7 0 2 1-66 Calling back the message notication sender Clearing all message notications by the message receiver Checking and Selecting a message notication by the message receiver Making calls with account codes in the Option mode and receiving calls Calling with Account Codes (Account Code Entry) Making calls with account codes except in the Option mode 1-68 Rejecting Incoming Calls (Do Not Disturb DND) 1-70 Calling an Extension which Denies Receiving Calls (Do Not Disturb Override) Secret Dialing 1-72 7 6 2 # Alarm Setting (Timed Reminder) 1 2 7 6 0 1 hour minute Stopping the alarm Checking the set time (with a display PT only) Time (Day/Night/Lunch) Service 1-74 Conrming the current mode (with a display PT only) Joining or Leaving a Call Distribution Group (Log-In/Log-Out) Log-In / Log-Out (Using the Log-In/Log-Out button) Log-In / Log-Out (Using the feature number) Canceling a monitor temporarily 1-76 Room Monitor Setting a monitor by PT Monitoring Paging a monitored room Monitoring through a doorphone Data Line Security 1-78 Mixed Station Dialing External Feature Access Using the FLASH/RECALL button Using the feature number 1-80 Turning on the Background Music (BGM) Self-Extension Number Conrmation (KX-T7330 only) Checking Pulse to Tone Conversion Extension Button Conrmation (KX-T7330 only) 1-82 Canceling the Feature Settings (Station Feature Clear) Clearing the current feature settings Alternate Calling Ring/Voice (Voice to Ring only) Doorphone Call Calling an extension from a doorphone Answering a doorphone call Calling a doorphone 1-84 Door Opener Listening to a stored message Using the Message Waiting (MESSAGE) button Voice Mail Integration 1-86 By manual dialing Calling Using Your Privileges at Another Extension (Walking COS) Making a call 1-88 Ringing Pattern Selection Distinctive Dial Tones Power Failure Transfer Lockout Date and Time Setting 1-90 Operations 1-91 / DSS Console Operations 1 2 Electronic Station Lockout CANCEL ALL You can cancel Electronic Station Lockout at all extensions. 8 Timed Reminder, Remote (Wake-Up Call) The operator or manager can remotely set or cancel the Timed Reminder of a desired extension. 1-92 7 6 2 extension no. # 7 6 3 Checking the time setting (with a display PT only) Outgoing Message (OGM) Recording a message Playing back a message 1-94 Locking Remote Station Lock Unlocking Time (Day/Night/Lunch) Service Setting Changing Day, Night or Lunch mode in manual or automatic mode Conrming the current mode (with a display PT only) Canceling the manual Day, Night or Lunch mode and returning to the automatic mode 1-96 Extension Password Set (Manager only) 1-98 Initial Settings Operations 1-99 One-Touch Dialing Assignment Extension Number Assignment You can assign a desired number to a DSS button. One-Touch Access Assignment for System Features You can assign a desired feature to a DSS or PF button. To cancel after programming 1-100 Day, Night and Lunch Buttons Assignment (Operator/Manager only) Station Lock Button Assignment (Operator/Manager only) One-Touch Dialing Direct Station Dialing Call Transfer One-Touch Access for System Features 1-102 Without Transfer With Transfer Page 2.1 Tone / Ring Tone List 2-2 < TONE > < RING TONE > 2.2 LED Indication LED Indication on the INTERCOM Button BLF on DSS Button Flashing light patterns LED Indication on the CO Button Feature Numbers and Additional Required Digits Page 2-6 Feature Numbers D 2-8 Page 2-10 2.5 Troubleshooting If a power failure occurs... Power Failure Transfer Page A B C D E F G H I L M N O P R S T V W