System speed dial no | Panasonic KX-TA308 instruction

1.3Making Calls

Dialing with System Speed Dialing (System Speed Dialing)

Allows you to make a call using pre-programmed speed dial numbers. This system supports 100 speed dial numbers which are available to all extension users.

PT and SLT

AUTO/STORE

For a PT

system speed dial no.

For an SLT

Lift the handset or press	For a PT: Press AUTO/STORE.	Enter a system speed dial number
SP-PHONE/MONITOR.	For an SLT: Dial .	(00 through 99).

•	You will not hear a tone.	• The AUTO/STORE indicator light
•	The AUTO/STORE indicator lights.	turns off.

!• System Speed Dial numbers must be stored by System Programming.

•“Speed Dialing”, “One-Touch Dialing” and manual dialing can be used together.

•You may press a CO button or dial a line access code to select a desired outside (CO) line before pressing the AUTO/STORE button or dialing .

•It is possible to cancel toll restriction with this feature (Toll Restriction Override for System Speed Dialing). In this case, System Programming is necessary.

PT	• A System Speed Dial number can be divided when stored.
	<Example>
	If the number is divided and stored in System Speed Dial numbers 01 and 02,
	Press: [AUTO/STORE] [0] [1] [AUTO/STORE] [0] [2].
PT	• The dialed number appears on the display.
	• A rotary telephone cannot use this feature.
SLT	• A rotary telephone cannot use this feature.

☞• See the Installation Manual, Section 3, “Toll Restriction for System Speed Dialing”.

• See the Installation Manual, Section 3, “System Speed Dialing”.

Basic Operations

Operations 1-23

Image 31

Panasonic KX-TA308 operating instructions Dialing with System Speed Dialing System Speed Dialing, System speed dial no

Contents

Operating Instructions Telephone System Components Important Information Precautions Introduction Structure of the Manual Description of the Symbols Mainly Used in this Manual Contents Advanced Operations Appendix Section Operations Before Operating What kind of telephone do you use? Description of the Symbols Used in this Manual2Operations Interrupting an Existing Call Executive Busy Override Before Operating Operating exampleOperations 4Operations Proprietary Telephone SettingsWhen the display shows the initial programming mode Be sure the telephone is idle and on-hook Preferred Line Assignment Outgoing Customizing Your Telephone FunctionsOutside CO line no Outside CO Line Ringing Selection Preferred Line Assignment Incoming6Operations Intercom Alert Assignment Proprietary Telephone Setting Data Default SetCall Waiting Tone Selection Changing the Flexible Buttons Customizing the Buttons on Your Telephone8Operations Single-CO S-CO Button Line Access Buttons Extension no DSS Direct Station Selection Button10Operations Outside CO line group no Conference Button One-Touch Dialing ButtonTelephone no 12Operations FWD/DND Forward/Do Not Disturb ButtonSave Button Log-In/Log-Out Button Feature number One-Touch Access for System FeaturesRestoring the Message Button Volume Control Handset Receiver/Ringer/Speaker Display Contrast Adjustment14Operations To adjust the speaker volume Making Calls Using the handsetUsing the Speakerphone Using a DSS Direct Station Selection button Outside Calling Calling an Operator Operator Call Phone no Making Outside Calls Using Automatic Line AccessMaking Outside Calls Using Individual Line Access 18Operations Line group no Flash/RecallWhile hearing any tone, dialing, or talking Outside CO Phone no 20Operations Switching from the handset to handsfree modeSwitching from handsfree to the handset mode Handsfree Operation Making Emergency Calls Emergency Call Line access code Emergency noDialing 22Operations Dialing by Simply Pressing a Button One-Touch Dialing System speed dial no Dialing with System Speed Dialing System Speed Dialing Desired no Dialing with Personal Speed Dialing Personal Speed DialingStoring a phone number 24Operations Checking the stored personal speed dialing numbers Dialing by Simply Going Off-Hook Pickup Dialing Setting / Canceling26Operations Redialing the Last Number Dialed Last Number Redial Redialing Automatically Automatic Redial 28Operations Redialing the Saved Number Saved Number RedialStoring During a conversation or while hearing a busy tone If you make an intercom call and hear a busy tone Answering an outside CO line recall SettingCanceling Answering an intercom recall To terminate one party and talk to the other Interrupting an Existing Call Executive Busy OverrideExecutive Busy Override Extension To leave the conference 32Operations Executive Busy Override Outside CO Line To set To cancel Receiving Calls Receiving Calls34Operations When the Auto ANS/MUTE indicator is on When the SP-PHONE and the Auto ANS/MUTE indicators are offHandsfree Answerback 36Operations Picking up a Call Ringing at Another Extension Call PickupDirected Call Pickup Group Call Pickup TAM no Call Retrieving from a TAM Telephone Answering MachineDenying/allowing your call to be picked up Call Pickup Deny While the TAM is answering a call Retrieving a call on hold During a ConversationPlacing a Call on Hold Call Hold Placing a call on hold Placing a call on exclusive hold Placing a Call on Hold Exclusively Exclusive HoldRetrieving a call on exclusive hold At the other extension Retrieving a Call on Hold Call Hold RetrieveRetrieving an outside call on hold Retrieving an intercom call on hold Retrieving a parked call Placing a Call in System Parking Area Call ParkParking zone no Unscreened Call Transfer Screened Call Transfer42Operations 30 sec., the call will return to you Transfer Recall Call Transfer using a DSS buttonWith Transfer mode Without Transfer mode 44Operations Line access code Phone no To talk to the new caller by terminating the current call Setting / Canceling for outside callsSetting / Canceling for intercom calls Call Waiting 46Operations To talk to the new party by holding the current call Between two extensions Call SplittingBetween one extension and one outside line Between two outside lines External PagingAll extensions Group Answering a All extensions & External 50Operations Transferring after paging Paging and TransferFor all extensions Turning off the Microphone Microphone Mute During a conversation in the handsfree modeWhen microphone mute is established See the Installation Manual, , Microphone Mute Forwarding a Call Call Forwarding Before Leaving Your Desk52Operations All Calls To Outside CO Line Busy or No Answer54Operations At the destination extension Follow Me Canceling Call Forwarding at your original extension Cancel56Operations Lock code Locking Your Telephone Electronic Station LockoutLocking Unlocking 58Operations Extension numberHourminute Month/day During a 2-party conversation Useful FeaturesConference 3-party Establishing a conference 60Operations To talk to the original party while holding the third party SLT 62Operations Conference 5-party During a 3-party conversation 64Operations Leaving a message notiﬁcation Canceling a message notiﬁcationCanceling using the Message button Leaving a Message Notiﬁcation Message Waiting 66Operations When the telephone is idle and on-hookCalling back the message notiﬁcation sender Clearing all message notiﬁcations by the message receiver Account code Making calls with account codes except in the Option modeLine access code Calling with Account Codes Account Code Entry 68Operations Rejecting Incoming Calls Do Not Disturb DND For a PT To set For an SLT To cancel 70Operations Secret Dialing When storing the phone number 72Operations Alarm Setting Timed ReminderHour Minute Checking the set time with a display PT only Stopping the alarm 74Operations Time Day/Night/Lunch ServiceConﬁrming the current mode with a display PT only When the telephone is idle Log-In / Log-Out Using the feature number Log-In / Log-Out Using the Log-In/Log-Out buttonJoining or Leaving a Call Distribution Group Log-In/Log-Out Paging a monitored room Canceling a monitor temporarilyRoom Monitor Monitoring Monitoring through a doorphone Data Line SecurityDoorphone no 78Operations Mixed Station Dialing During a conversation with an outside party External Feature AccessUsing the FLASH/RECALL button Using the feature number Turning on the Background Music BGM Self-Extension Number Conﬁrmation KX-T7330 only80Operations Checking Desired no. Tone modeExtension Button Conﬁrmation KX-T7330 only Pulse to Tone Conversion 82Operations Canceling the Feature Settings Station Feature ClearClearing the current feature settings Alternate Calling Ring/Voice Voice to Ring only Answering a doorphone call When you hear the doorphone ring tone at the extensionDoorphone Call Calling an extension from a doorphone 84Operations Door OpenerTo unlock the door from an assigned extension To unlock the door while talking to the doorphone Listening to a stored message Using the Message Waiting Message buttonSetting no Voice Mail Integration 86Operations By manual dialingVoice Mail extension no Making a call Extension password Extension no Phone noAt another extension Distinctive Dial Tones Ringing Pattern Selection88Operations Lockout Power Failure Transfer Month Day Day of the week Operator / Manager Service FeaturesDate and Time Setting 90Operations Timed Reminder, Remote Wake-Up Call Electronic Station Lockout Cancel ALLExtension no Hour 92Operations Checking the time setting with a display PT only Recording a message Outgoing Message OGMPlaying back a message 94Operations Remote Station Lock For Manual-Lunch mode Time Day/Night/Lunch Service SettingFor Manual-Day mode For Manual-Night mode 96Operations Password Extension Password Set Manager only Initial Settings DSS Console Features98Operations One-Touch Dialing Assignment One-Touch Access Assignment for System FeaturesFeature no Extension Number Assignment Station Lock Button Assignment Operator/Manager only To cancel after programming100Operations One-Touch Dialing Direct Station Dialing With Transfer One-Touch Access for System FeaturesCall Transfer Without Transfer Section Appendix Sec Tone / Ring Tone List2Appendix LED Indication on the CO Button LED IndicationFlashing light patterns LED Indication on the Intercom Button Feature Numbers and Additional Required Digits Feature Number List4Appendix Hhmm Hh hour 01 12 / mm minute 00 6Appendix Feature Numbers Display Example 8Appendix Pressing the FWD/DND or Pause button Account Code Entry 10Appendix If a power failure occurs TroubleshootingPower Failure Transfer 12Appendix Index-1 Index Index-2 Cancel ALL Index-3 Outside-to-Outside CO-to-CO Line Index-4 Redial After paging Paging and Transfer Index-5 Memo Memo Memo Page Copyright