Panasonic KX-TA308 operating instructions Follow Me, At the destination extension

1.6Before Leaving Your Desk

!• If an incoming outside call is forwarded to an outside (CO) line, the “Outside-to-Outside (CO-to-CO) Line Call Duration Time” is applied to the call and the line will be disconnected when it expires (default: 10 min.). An alarm tone is sent to both parties 15 seconds before the assigned duration time limit.

•Up to 32 digits (including the line access code) can be programmed.

•If a CPC or reverse signal is sent to an outside (CO) line before the assigned duration time limit, a call between two external parties will be disconnected.

•This feature cannot be used for incoming outside calls from lines assigned as “Normal”, by System Programming.

•In the account code verify-all and forced modes, an account code must be stored by pressing

“ ” and entering the account code after the line access code (“ ” is not regarded as a pause).

Follow Me

You can set the “Call Forwarding” feature from the destination extension. This is useful if you forget to set “Call Forwarding — All Calls” before you leave your desk.

Setting

PT and SLT

At the destination extension

	CO	For a PT
	7	1 For an SLT	5	extension no.	#
Lift the handset	For a PT: Press the CO		Dial 5.	Enter your	Dial #. Confirmation	Hang up or press
or press		assigned as the		extension number	tone and	SP-PHONE/MONITOR.
SP-PHONE/MONITOR.		FWD/DND button.		(100 through 199).	dial tone
	For an SLT: Dial 71.

•The FWD/DND (CO) indicator light flashes red slowly.

•Single line telephone users can dial “0” instead of “#”.

!• This feature can be canceled at your extension or the destination extension.

Basic Operations

Operations 1-55