10) Press ◀▶ to switch [COMMAND]. zzThe setting will change as follows each time

you press the button.

[POWER ON] [STANDBY] [SHUTTER]*1

[P IN P]*1

 

[LAMP

*1

 

[INPUT]*1

 

 

SELECT]

 

 

 

*1: Displays the details set in Step 12).

 

 

11) Press the <ENTER> button. zzThe [COMMAND] detailed setting screen is

displayed.

12) Press ▲▼ to select a command. zzFor [SHUTTER], [INPUT], [LAMP SELECT],

and [P IN P], the setting will change as follows each time you press the button.

zz[SHUTTER]

[OPEN][CLOSE]

zz[INPUT]

[RGB1]

 

[RGB2]

 

[VIDEO]

 

 

 

 

 

[SDI2]*1

 

 

 

[DVI-D]

 

 

 

 

 

[SDI1]*1

 

 

 

[HDMI]

*1: PT-DZ21KU and PT-DS20KU only

zz[LAMP SELECT]

[SINGLE] [DUAL]

[QUAD][TRIPLE]

zz[P IN P]

[OFF]

 

[USER1]

 

 

 

[USER3]

 

[USER2]

13) Press the <ENTER> button.

zzThe command is fixed and ● is displayed at the left of the selected command.

zzAfter the command is fixed, press the <MENU> button to close the detailed setting menu.

14)Press ▲▼ to select [STORE], and press the <ENTER> button.

[PROJECTOR SETUP] menu

Note

zzIf you try to register a setting that would cause the lamp to flash for a short time, an error message will be displayed on the screen. Set the time and command again.

zzTo delete a command already set, press the <DEFAULT> button on the Step 6) screen, or select [DELETE] on the Step 7) screen and press the <ENTER> button.

zzIf multiple commands have been set for the same time, they are executed in chronological order starting from the smallest command number.

zzThe operating time will be the local time. ( page 110) zzIf an operation is executed with the remote control or control panel of the projector or with a control command before the command set in [SCHEDULE]

is executed, the command set with this function may not be executed.

Settings

ENGLISH - 107