Ceilingmountmountbracketbracketsafeguardssafeguards

zzWhen installing the projector to a ceiling, be sure to use the specified ceiling mount bracket (Model No.: ET-PKD510H (for high ceilings), ET-PKD510S (for low ceilings)).

zzWhen installing the projector, attach the drop-prevention set included with the ceiling mount bracket to the projector.

If you need the drop-prevention set (hex bolt with washer (M10 x 40), wire rope: TTRA0143) separately, consult your dealer.

zzRequest for a qualified technician to do the installation.

zzPanasonic takes no responsibility for any damage to the projector resulting from use of a ceiling mount bracket not manufactured by Panasonic or the inappropriate choice of location for installation, even if the warranty period of the projector has not expired.

zzUnused products must be removed promptly by a qualified technician.

zzReferring to the screw holes for ceiling mount diagram below, use screws of sufficient length to reach the imbedded nuts.

zzUse a torque screwdriver or Allen torque wrench to tighten bolts to their specified tightening torques. Do not use tools such as electric screwdrivers or impact screwdrivers.

zzFor details, read the installation manual that comes with the ceiling mount bracket.

zzThe part numbers of accessories and separately sold components are subject to change without notice.

Bottom view

110

145

Model No. of ceiling mount bracket: ET-PKD510H (for high ceilings)

(4-11/32")

(5-23/32")

Unit: mm

ET-PKD510S (for low ceilings)

 

110110

(4-11/32") (4-11/32")

135.5 145 (5-11/32") (5-23/32")

(1-7/8")

(11298-23/32") 9/16")-(21548

48

 

Screw holes for ceiling mount

M6

30 mm (1-3/16") 25 mm (31/32")

Max. screw hole depth

 

Screw hole depth

 

M6

Space

30 mm (1-3/16")

 

12 mm (15/32")

 

12 mm (15/32")

 

 

Max. screw hole depth

Embedded nut

 

(Screw hole depth)

Torque: 4 ± 0.5 N·m

Appendix

176 - ENGLISH