[SECURITY] menu

9) Press ◀▶ to switch between enable/ disable.

zzThe setting will change as follows each time you press the button.

[ENABLE][DISABLE]

[ENABLE] Enables button operations.

[DISABLE] Disables button operations.

10) Press ▲▼ to select [APPLY], and press the <ENTER> button. zzThe confirmation screen is displayed.

11)Press ◀▶ to select [OK], and press the <ENTER> button.

Note

zzWhen a button operation is performed on the device set to [DISABLE], the [CONTROL DEVICE PASSWORD] screen is displayed.

Enter the control device password.

zzThe [CONTROL DEVICE PASSWORD] screen will disappear when there is no operation for approximately ten seconds.

zzIt will not be possible to turn off the power (standby status) if the operations of both of [CONTROL PANEL] and [REMOTE CONTROL] are set to [DISABLE].

zzWhen the setting has completed, the menu screen will disappear. To operate continuously, press the <MENU> button to display the main menu.

zzEven when button operation on the remote control is disabled, the <ID SET> button and the <ID ALL> button are enabled.

Settings

[CONTROL DEVICE PASSWORD CHANGE]

The control device password can be changed.

1) Press ▲▼ to select [CONTROL

DEVICE PASSWORD CHANGE].

2) Press the <ENTER> button. zzThe [CONTROL DEVICE PASSWORD

CHANGE] screen is displayed.

3)Press ▲▼◀▶ to select the text, and press the <ENTER> button to enter the text.

4)Press ▲▼◀▶ to select [OK], and

press the <ENTER> button. zzTo cancel, select [CANCEL].

Attention

zzThe initial password when used for the first time or after initializing all the user data is “AAAA”.

zzChange the password periodically that is hard to guess.

124 - ENGLISH