The power indicator displays the status of the power. Check the status of the power indicator <ON (G)/STANDBY (R)> before operating the projector.
Power indicator <ON (G)/STANDBY (R)>
Indicator status |
| Status | ||
No illumination or flashing |
| The main power is switched off. | ||
|
|
| The power is switched off. (Standby mode.) | |
Red |
| Lit | Projection will start if the power on < | > button is pressed. |
| zzThe projector may not operate when the lamp indicators | |||
|
|
| <LAMP1>/<LAMP2>/<LAMP3>/<LAMP4> or temperature indicator | |
|
|
| <TEMP> is flashing ( page 142). | |
Green |
| Lit | Projecting. | |
|
|
| The projector is preparing to switch off the power. | |
Orange |
| Lit | The power is switched off after a while. (Changes to the standby | |
|
|
| mode.) | |
Note
zzIn about 75 seconds after the projector is switched off and the luminous lamp cooling is started, the lamp indicators will not light up even if the power is switched on. After the power indicator <ON (G)/STANDBY (R)> lights in red, turn on the power again.
zzThe projector consumes power even in standby mode (power indicator <ON (G)/STANDBY (R)> lit in red). Refer to “Power consumption” ( page 172) for the power consumption.
zzThe power indicator <ON (G)/STANDBY (R)> will flash in green if a remote control signal is received.
zzThe power indicator <ON (G)/STANDBY (R)> will flash slowly in green while the shutter is closed. ( page 58) zzIf the power indicator <ON (G)/STANDBY (R)> is flashing in red, consult your dealer.
Basic Operation
ENGLISH - 49