Remotecontrolcontrolope ationoperation

Operation Basic

Using the shutter function

If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the image temporarily.

button

1) Press the <SHUTTER> button on the remote control or the control panel. zzThe image disappears.

2) Press the <SHUTTER> button again. zzThe image is displayed.

Note

zzThe power indicator <ON (G)/STANDBY (R)> will flash slowly in green while the shutter is closed ( page 58).

zzYou can set the speed of shutter opening/closing via [SHUTTER SETTING] ( page 96).

Using the on-screen display function

Turn off the on-screen display function (no display) when you do not wish the viewers to see the on- screen display, such as the menu or the input terminal name.

button

1) Press the <ON SCREEN> button on the remote control.

zzThe on-screen display disappears.

2) Press the <ON SCREEN> button again. zzThe on-screen display appears.

Note

zzIf you press the <MENU> button on the control panel for at least three seconds while the on-screen indication is off, the on-screen display is turned on.

Switching the input

The input for projection can be switched.

button

Press the input selection (<RGB1>, <RGB2>, <DVI-D>, <VIDEO>, <HDMI>, <SDI 1/2>) buttons on the control panel or the remote control.

<RGB1>

Switches to RGB1 input.

<RGB2>

Switches to RGB2 input.

<DVI-D>

Switches to DVI-D input.

<VIDEO>

Switches to VIDEO input.

<HDMI>

Switches to HDMI input.

<SDI 1/2>*1

Switches to SDI 1 or SDI 2 input.

Switches to another input when one

 

input has already been chosen.

*1: SDI input is only PT-DZ21KU, PT-DS20KU.

58 - ENGLISH