Settings
Select [DISPLAY OPTION] from the main menu, and select the item from the
Refer to “Navigating through the menu”
( page 61) for the operation of the menu screen.
zzAfter selecting the item, press ◀▶ to set.
[COLOR MATCHING]You can correct the color difference between the sets when multiple sets are to be used simultaneously.
1)Press ▲▼ to select [COLOR
MATCHING].
2)Press ◀▶ to switch [COLOR
MATCHING].
zzThe setting will change as follows each time you press the button.
[OFF] |
| [3COLORS] |
| [7COLORS] |
[MEASURED] |
|
| [709MODE] | |
|
|
| ||
[OFF] | Color matching adjustment is not | |||
carried out. | ||||
|
| |||
[3COLORS] | The three colors [RED], [GREEN], | |||
and [BLUE] can be adjusted. | ||||
|
| The seven colors [RED], [GREEN], | ||
[7COLORS] | [BLUE], [CYAN], [MAGENTA], | |||
[YELLOW], and [WHITE] can be | ||||
|
| adjusted. | ||
[709MODE] | Refer to “To use a colorimeter to | |||
|
| adjust the color matching” ( page 89) | ||
[MEASURED] | ||||
for details about this mode. | ||||
3) Select [3COLORS] or [7COLORS] in Step 2).
4) Press the <ENTER> button.
zzThe [3COLORS] or [7COLORS] screen is displayed.
5) Press ▲▼ to select [RED], [GREEN], and [BLUE] (for [7COLORS]: [RED], [GREEN], [BLUE], [CYAN], [MAGENTA], [YELLOW], and [WHITE]).
6) Press the <ENTER> button
zzThe [3COLORS:RED], [3COLORS:GREEN] or [3COLORS:BLUE] screen is displayed.
For [7COLORS], the [7COLORS:RED], [7COLORS:GREEN], [7COLORS:BLUE], [7COLORS:CYAN], [7COLORS:MAGENTA], [7COLORS:YELLOW] or [7COLORS:WHITE] screen is displayed.
zzSet [AUTO TESTPATTERN] to [ON] to display a test pattern of selected colors.
7) Press ◀▶ to adjust the level. zzAdjustment value will change between 0 and
2 048.
Note
zzOperation when correcting the adjustment color When the adjustment color and the same correction color are moved: The luminance of the adjustment color will change.
When correction color red is changed: Red is added to or subtracted from the adjustment color. When correction color green is changed: Green is added to or subtracted from the adjustment color. When correction color blue is changed: Blue is added to or subtracted from the adjustment color.
zzThis adjustment should be carried out by a person who is familiar with the projector or by a service person because a high level of skill is required to make a successful adjustment.
zzPressing the <DEFAULT> button will restore the factory default settings for all items.
zzWhen [COLOR MATCHING] adjustment has been set to any setting other than [OFF], the [COLOR TEMPERATURE] is fixed to [USER1].
zzSet [3D COLOR MATCHING] ( page 84) to set whether 2D and 3D signals are set separately or whether common data is used.
zzWhen 2D and 3D settings are set separately, [NATIVE] or [3D] is displayed in the upper right of the menu.
88 - ENGLISH