Settings
[ADVANCED MENU]
[FRAME RESPONSE]Image processing is simplified when 1080/60i, 1080/50i, and 1080/24sF signals are input to reduce image frame delay.
1)Press ▲▼ to select [FRAME
RESPONSE].
2)Press ◀▶ to switch [FRAME
RESPONSE].
zzThe setting will change as follows each time you press the button.
[NORMAL] 
[FAST]
[NORMAL] Standard setting.
[FAST] | Set when the picture is displayed | |
later than sound. | ||
|
Note
zzWhen [FRAME RESPONSE] is set to [FAST], picture quality deteriorates. Noise reduction, digital cinema quality and P IN P functions also cannot be used.
zzWhen [NOISE REDUCTION] is set to other than [OFF], [FRAME RESPONSE] cannot be set.
[FRAME LOCK] (PT‑DZ21KU and
PT‑DS20KU only)
Set this to view 3D display when the scanning frequency of the signal is 25 Hz, 50 Hz, and 100 Hz.
1) Press ▲▼ to select [FRAME LOCK].
2) Press ◀▶ to switch [FRAME LOCK]. zzThe setting will change as follows each time
you press the button.
[OFF] |
|
| [ON] |
|
| ||
[OFF] | Decreases the flickering. | ||
Synchronizes the display to the
[ON] scanning frequency of the input signal.
Note
zz[FRAME LOCK] is not displayed when the scanning frequency of the signal other than above is input or 2D images are displayed.
zzThe screen may flicker when the [FRAME LOCK] is set to [ON].
zzThe display may look discontinuous when the [FRAME LOCK] is set to [OFF].
This will allow the position of the image to move within the display area arbitrarily when the input image is not using the whole display area.
1) Press ▲▼ to select [RASTER
POSITION].
2) Press the <ENTER> button.
zzThe [RASTER POSITION] screen is displayed.
3) Press ▲▼◀▶ to adjust the position.
80 - ENGLISH