The initial setting screen is displayed when the projector is switched on for the first time after purchase as well as when [ALL USER DATA] ( page 114) in [INITIALIZE] is executed. Set them in accordance with circumstances. In other occasions, you can change the settings by menu operations.
Note
zzWhen the projector is used for the first time, you may be required to adjust the focus, zoom, and shift to display the menu screen clearly.
Refer to “Adjusting the focus, zoom, and shift” ( page 52) for details.
Select the language to show on the screen. ( page 81)
1)Press ▲▼ to select the desired language.
INITIAL SETTING
PLEASE SELECT LANGUAGE.
SELECT
ENTER SET
2)Press the <ENTER> button to proceed to the initial setting.
Set each item.
1)Press ▲▼ to select an item.
2)Press ◀▶ to switch the setting.
INITIAL SETTING
| PROJECTION METHOD |
| FRONT/FLOOR |
| |
| COOLING CONDITION |
| FLOOR SETTING |
| |
|
|
| |||
| SCREEN FORMAT |
| 16：10 |
| |
|
|
|
| ||
| SCREEN POSITION |
|
| ||
|
|
| |||
| HIGH ALTITUDE MODE |
| OFF |
| |
| SWITCH TO HIGH ALTITUDE MODE | ||||
| "ON" IF OVER 1400m(4593Ft). |
|
| ||
|
| MENU SELECT | CHANGE | ||
| ENTER | SET |
|
| |
Refer to the following page for details of each item.
zz[PROJECTION METHOD] ( page 99) zz[COOLING CONDITION] ( page 100) zz[SCREEN FORMAT] ( page 90) zz[SCREEN POSITION] ( page 90) zz[HIGH ALTITUDE MODE] ( page 100)
3) Press the <ENTER> button. zzConfirm the setting value to complete the initial
setting.
Note
Preparation
zzIf you press the <MENU> button in the initial setting (projector setup) screen, you can go back to the initial setting (display language) screen.
zzYou can set [SCREEN FORMAT] and [SCREEN POSITION] for
ENGLISH - 21