Settings
[PICTURE] menu
[GAMMA]Switch gamma mode.
1) Press ▲▼ to select [GAMMA].
2) Press ◀▶ or the <ENTER> button. zzThe [GAMMA] individual adjustment screen is
displayed.
3) Press ◀▶ to switch the [GAMMA]. zzThe setting will change as follows each time
you press the button.
[DEFAULT]*1[USER1]
[2.8][USER2]
[DICOM SIM.]
(0.1 increments)
[1.0]
[2.0][1.8]
*1: When [PICTURE MODE] is set to [DYNAMIC], [USER], or [DICOM SIM.], [DEFAULT] cannot be selected.
Note
zzDICOM is an abbreviation for “Digital Imaging and Communication in Medicine” and is a standard for medical imaging devices. Although the DICOM name is used, the projector is not a medical device, and should not be used for purposes such as diagnosis of display images.
■■To change the name of [USER1] or [USER2]
4) Select [USER1] or [USER2] in Step 3).
5) Press the <ENTER> button. zzThe [GAMMA] screen is displayed.
6) Press the <ENTER> button. zzThe [GAMMA NAME CHANGE] screen is
displayed.
7)Press ▲▼◀▶ to select the character, and press the <ENTER> button to enter the character.
8)Press ▲▼◀▶ to select [OK], and
press the <ENTER> button.
zzThe Select Gamma name is changed.
Note
zzWhen a name is changed, display of [USER1] and [USER2] on the menu is also changed.
You can correct the image to the optimal vividness even if it is projected under a bright light.
1) Press ▲▼ to select [SYSTEM
DAYLIGHT VIEW].
2) Press ◀▶ or the <ENTER> button. zzThe [SYSTEM DAYLIGHT VIEW] individual
adjustment screen is displayed.
3) Press ◀▶ to switch the [SYSTEM
DAYLIGHT VIEW].
zzThe setting will change as follows each time you press the button.
[OFF] (No |
| [1] (Low) |
correction) |
| |
|
| |
|
|
|
[3] (High) |
| [2] (Medium) |
You can adjust the sharpness of the projected image.
1) Press ▲▼ to select [SHARPNESS].
2) Press ◀▶ or the <ENTER> button. zzThe [SHARPNESS] individual adjustment
screen is displayed.
3) Press ◀▶ to adjust the level.
Operation | Adjustment | Adjustment | |
range | |||
|
| ||
Press ▶ . | Contours become |
| |
sharper. |
| ||
| 0 - 15 | ||
Press ◀ . | Contours become | ||
| |||
softer. |
| ||
|
|
Note
zzIf you press ▶ while the adjustment value is [15], the value will become [0]. If you press ◀ while the adjustment value is [0], the value will become [15].
68 - ENGLISH