Attaching/removingthetheprojectionlenslens(optionalaccessory)

Move the lens to the home position before replacing or removing the lens. ( page 53)

Attention

zzReplace the projection lens after turning off the power of the projector.

zzDo not touch the lens signal receiver. Dust or dirt may cause defective contact. zzDo not touch the lens surface with your bare hands.

zzBefore attaching the projection lens, remove the lens cover attached to the projection lens.

Attaching the projection lensRemoving the projection lens

1) Remove the projection lens cover. zzWhile grasp the right and left buttons from

vertical and horizontal directions, pull the lens cover to remove.

2)Insert by aligning the projection lens (orange) mark with the mark on the projector body (a circle to the left of LOCK) and turn clockwise until it clicks.

3) Secure the projection lens with the lens fixing screw supplied *1. zzUse a Phillips screwdriver to secure it in the

first screw hole to the right of the projection lens (orange) mark.

*1: Some lenses may not have a screw hole to use to secure the projection lens.

4) Attach the projection lens cover.

Attention

zzTurn the projection lens counterclockwise to confirm that it does not come out.

zzStore the removed dust sponge in a safe place to transport or store.

1) Remove the projection lens cover. zzWhile grasp the right and left buttons from

vertical and horizontal directions, pull the lens cover to remove.

2) Remove the lens fixing screw*1. zzUse a Phillips screwdriver to remove the first

screw to the right of the projection lens (orange) mark.

*1: Some lenses may not have a screw hole to use to secure the projection lens.

3)While pressing the lock button, turn the projection lens counterclockwise

to remove.

zzTurn counterclockwise until the projection lens (orange) mark is at the mark on the projector body (the circle to the left of LOCK).

/RFNEXWWRQ

4)Attach the projection lens cover and dust sponge.

Attention

zzStore the removed lens where it will be free from vibration and impact.

zzStore the removed lens fixing screw in a safe place.

Getting Started

ENGLISH - 43