■■To display the adjustment marker

7) Press ▲▼ to select [MARKER].

8) Press ◀▶ to switch [ON].

zzA marker for image position adjustment is displayed. The position where the red and green lines overlap for the sets to join will be the optimal point.

Make sure to set the correction width for the sets to join as the same value. Optimal joining is not possible with the sets with different correction widths.

The optimal point is the point where this line overlaps.

Green line

Red line

9) Press ▲▼ to select [BRIGHT ADJUST].

10) Press the <ENTER> button.

zzThe [BRIGHT ADJUST] screen is displayed. zzWhen [AUTO TESTPATTERN] in the [EDGE BLENDING] screen is set to [ON], completely

black test patterns will appear when the [BRIGHT ADJUST] screen is displayed.

11) Press ▲▼ to select [BRIGHT INSIDE].

12) Press the <ENTER> button.

zzThe [BRIGHT INSIDE] individual adjustment screen is displayed.

zzWhen [INTERLOCKED] is set to [OFF], [RED], [GREEN], and [BLUE] can be adjusted.

13) Press ▲▼ to select an item, and press ◀▶ to adjust the setting. zzOnce the adjustment is completed, press the

<MENU> button to return to the [BRIGHT

ADJUST] screen.

14)Press ▲▼ to select [UPPER], [LOWER], [LEFT], or [RIGHT] in [OUTSIDE AREA].

15)Press ◀▶ to set the region (width) of the [BRIGHT INSIDE] adjustment.

16)Press ▲▼ to select [BRIGHT

OUTSIDE].

[ADVANCED MENU]

17) Press the <ENTER> button.

zzThe [BRIGHT OUTSIDE] individual adjustment screen is displayed.

zzWhen [INTERLOCKED] is set to [OFF], [RED], [GREEN], and [BLUE] can be adjusted.

18)Press ▲▼ to select an item, and ◀▶ to adjust the setting.press

[OUTSIDE AREA] (Right)

Projection range

Edge blending [WIDTH] (Right)

 

 

 

 

 

 

 

 

 

 

 

 

[MARKER] (Red)

Edge blending [START]

(Right)

[MARKER] (Green))

[BRIGHT OUTSIDE] [BRIGHT INSIDE]

Note

zzThe [BRIGHT ADJUST] function makes it harder to notice the black level of the part of the image overlapping getting brighter when multiple screens are set using [EDGE BLENDING]. The optimal point of the correction is set by adjusting [BRIGHT INSIDE] so the black level of the overlapping image area will be the same level as the non-overlapping area.

If the bordering part of the part where the image is overlapping and the non-overlapping part gets brighter after adjusting [BRIGHT INSIDE], adjust the width of the top, bottom, left, or right. Adjust [BRIGHT OUTSIDE] when the width adjustment makes only the border area darker.

zzThe joining part may look discontinuous depending on the position you are looking from when a screen with high gain or rear screen is used.

zzWhen horizontal and vertical edge blending are used simultaneously, adjust [BRIGHT BLENDING] before the Step 11) adjustment.

zzTo use either horizontal or vertical edge blending only, set all values of [BRIGHT BLENDING] to 0. zzThe [AUTO TESTPATTERN] settings change in conjunction with the [AUTO TESTPATTERN] in

[COLOR MATCHING].

Settings

ENGLISH - 79