A
Details | Measure | ||
display | |||
|
| ||
U04 | Air filter clog | zzClean the air filter unit. | |
U11 | Intake temperature warning |
| |
U12 | Optical module temperature warning | zzThe ambient temperature is too high. | |
U13 | Lamp surrounding temperature warning |
| |
U14 | Low temperature warning | zzThe ambient temperature is too low. | |
U21 | Intake temperature error |
| |
U22 | Optical module temperature error | zzThe ambient temperature is too high. | |
U23 | Lamp surrounding temperature error |
| |
U24 | Low temperature error | zzThe ambient temperature is too low. | |
U30 | Installation angle error | zzDo not use the projector tilted at an angle that | |
| exceeds ±15° from the horizontal plane. | ||
|
| ||
U31 | Portrait setting angle error | zzInstall the connecting terminals facing down. | |
U32 | Lamp unit usage error | zzFor portrait setting, use the replacement lamp unit (for | |
| portrait mode). | ||
|
| ||
| Lamp unit mixed usage error | zzDifferent types of lamp units have been installed. Use | |
|
| only the same type of lamp unit. The replacement | |
|
| lamp unit (for portrait mode) is marked on the right | |
|
| side of the lamp unit Model No. to make it easy to | |
U33 |
| differentiate from ordinary replacement lamp units. | |
|
|
|
| P | ||
|
|
|
| |
|
| Mark | ||
U41 | Lamp 1 cumulative operation time error |
|
| |
U42 | Lamp 2 cumulative operation time error | zzIt’s time to replace the lamp unit. Replace the lamp | ||
U43 | Lamp 3 cumulative operation time error | unit. | ||
U44 | Lamp 4 cumulative operation time error |
|
| |
U51 | Lamp 1 error | zzFailed to light the lamp. Switch the power on again | ||
U52 | Lamp 2 error | |||
|
| after letting the lamp cool down. If the lamp still | ||
U53 | Lamp 3 error | |||
doesn’t light up, consult your dealer. | ||||
U54 | Lamp 4 error |
|
| |
U61 | The cumulative operation time of |
|
| |
Lamp 1 has exceeded 2 000 hours*1 |
|
| ||
|
|
| ||
U62 | The cumulative operation time of |
|
| |
Lamp 2 has exceeded 2 000 hours*1 | zzThe lamp unit’s replacement period has been | |||
| ||||
U63 | The cumulative operation time of | exceeded. Replace the unit immediately. | ||
Lamp 3 has exceeded 2 000 hours*1 |
|
| ||
|
|
| ||
U64 | The cumulative operation time of |
|
| |
Lamp 4 has exceeded 2 000 hours*1 |
|
| ||
|
|
| ||
U71 | Lamp 1 not installed |
|
| |
U72 | Lamp 2 not installed | zzAttach the lamp unit. | ||
U73 | Lamp 3 not installed | |||
|
| |||
U74 | Lamp 4 not installed |
|
| |
U76 | Air filter unit not installed | zzAttach the air filter unit. | ||
U78 | Clog sensor error | zzClean the air filter unit or replace it. ( page 144) | ||
Maintenance
ENGLISH - 153