Important Information

Precautions for use

■■Do not use the projector tilted to the right or left

Using the projector at a vertical angle that exceeds 15° may reduce product life or result in malfunction.

■■When installing and using the projector at an angle that exceeds 30° vertically, set [COOLING CONDITION] ( page 100).

Failure to observe this will result in malfunctions or shorten the life of the lamp or other components.

■■When a replacement lamp unit is used (for portrait mode), install it with the terminals surface facing down

Do not use the projector tilted to the right and left, front and back.

Using the projector at an angle that exceeds 15° in either direction may reduce product life or result in malfunction.

■■Cautions when setting up the projector

zzWhen installing and using the projector with a method other than the floor standing installation using the adjustable feet, fix the projector using the six screw holes for ceiling mounting (see the figure below). (Screw diameter: M6, tapping depth inside the set: 30 mm (1-3/16"), torque: 4 ± 0.5 N·m)

Bottom view

110

145

Model No. of ceiling mount bracket: ET-PKD510H (for high ceilings)

(4-11/32")

(5-23/32")

Unit: mm

ET-PKD510S (for low ceilings)

 

110110

(4-11/32") (4-11/32")

135.5 145 (5-11/32") (5-23/32")

(1-7/8")

(11298-23/32") 9/16")-(21548

48

 

Screw holes for ceiling mount

M6

30 mm (1-3/16") 25 mm (31/32")

Max. screw hole depth

 

Screw hole depth

 

M6

Space

30 mm (1-3/16")

 

12 mm (15/32")

 

12 mm (15/32")

 

 

Max. screw hole depth

Embedded nut

 

(Screw hole depth)

Torque: 4 ± 0.5 N·m

16 - ENGLISH